1.
The Attempting Explanation for Calculating of Radial Component in Angular Contact Radial Bearings in the Teaching of Mechanical Design Fundamental;
“机械设计基础”课程教学中“角接触向心轴承轴向载荷的计算”的解疑尝试
2.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
3.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
4.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
5.
Most Bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
大多数轴承都支承径向或轴向负荷的转轴。
6.
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
7.
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
8.
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
9.
Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same, but may withstand the bigger radial direction load and the two axle to the load.
四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
10.
There is stop groove in the bearing outer ring or it is simultaneously matched with snap rong.
使用在对轴承向限位精度要求不高又限们结构简单的场合.不能承受轴向载荷.
11.
The effect of radial load to radial stiffness can be neglected.
径向载荷的变化对轴承径向刚度的影响可以忽略.
12.
Nonlinear Finite Element Analysis and Optimization of Hydraulic Cylinder Enduring Axial Loads and Radial Loads
液压缸承受轴向与径向载荷的非线性有限元分析与优化
13.
Mechanical Behavior of Spherical Plain Bearing Joint under Uni-directional Load
单向载荷作用下向心关节轴承球铰节点的受力性能
14.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
15.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
16.
How do engineering materials deform when bearing mechanical loads?
如何做工程材料变形时，轴承机械载荷？
17.
The basic stress-strain relations are defined with respect to an axially loaded member.
基本的应力-应变关系是用承受轴向载荷的构件确定的。
18.
Study on the thermal insulation transient process of radial sliding bearing under the turbulence of stepped loading
阶跃载荷扰动下径向滑动轴承绝热瞬态过程研究