1.
Hexagon socket head shoulder screws
GB/T5281-1985内六角圆柱头轴肩螺钉
2.
Slotted shoulder head screw with adjustable shoulder and thread sizes.
肩和螺纹大小可调整的带肩一字槽螺钉。
3.
Hexagonal head shoulder screw with adjustable shoulder and thread sizes.
肩和螺纹大小可调整的六角头带肩螺钉。
4.
Slotted shoulder screws
GB/T831-1988开槽无头轴位螺钉
5.
Remove the inboard seatback pivot bolt.
拆卸内侧座椅背枢轴螺钉。
6.
Lock rings at the end of shaft with scre
GB/T891-1986螺钉紧固轴端挡圈
7.
Slotted cheese head screws with shoulder
GB/T830-1988开槽圆柱头轴位螺钉
8.
Slotted raised cheese head with shoulder
GB/T946-1988开槽球面圆柱头轴位螺钉
9.
The pothole fractured a bolt on the axle.
壶穴使车轴上的一只螺钉破碎。
10.
Generally, two screws are placed in the hub: one screw bears on the key and the other bears on the shaft.
一般在轮毂内装有两个螺钉，一个螺钉压在键上，另一个则压在轴上。
11.
Bolt( screw, nut, stud, spring washer, pin, ball bearing, roller bearing) is the most commonly used machine part.
螺栓（钉、帽、头螺栓、簧垫圈、、珠轴承、柱轴承）最常用的机械零件。
12.
377 bolt (screw, nut, stud, spring washer, pin, ball bearing, roller bearing) is the most commonly used machine part.
螺栓（螺钉、螺帽、双头螺栓、弹簧垫圈、销、滚珠轴承、滚柱轴承）是最常用的机械零件。
13.
Analysis and Calculation about Axial Load of Rotate Shoulder Connection;
旋转台肩连接螺纹轴向载荷分析与计算
14.
A Comparative Study on the Effects of Polyaxial-headed Axial Direction on the Pullout Strength of Polyaxial Pedicle Screw;
钉冠轴向对万向椎弓根螺钉拔出力影响的对比研究
15.
Implant lateral mass screw and vertebrae pedicle screw for treatment of atlanto-axial unsteadiness using poly axial screw-rod system
多轴向钉棒系统经寰椎侧块枢椎椎弓根螺钉固定治疗寰枢椎不稳
16.
To clinch(a bolt, for example).
钉牢（例如螺丝钉）
17.
The Application of the Axial View of the Pedicel of S1 for Internal Fixation of Sacroiliac Screw;
S1椎弓根轴位像在骶髂螺钉内固定中的应用
18.
Posterior fixation of atlantoaxial fracture dislocation using polyaxial screw-rod system through pedicles
后路多轴螺钉-棒系统治疗上颈椎骨折脱位