1.
axial double mechanical seal
轴向双端面机械密封
2.
radial double mechanical seal
径向双端面机械密封
3.
The Edgy Machine that Takes Assistance Sealing Structure;
带有端面辅助密封作用的刀口机械密封结构
4.
Numerical analysis on flow field in mechanical seal with porous seal ring face
多孔端面机械密封内流场的数值分析
5.
Fractal Characteristics of End Faces' Topography in Friction Pair of Mechanical Seals
机械密封摩擦副端面形貌的分形特性
6.
Experimental Investigation into Friction State of End Faces of GY70 Mechanical Seal
GY70型机械密封端面摩擦状态试验研究
7.
Influence of Dimple Diameter on Dynamic Performance of Gas Multi-pored Face Mechanical Seal
气体多孔端面机械密封孔径尺寸对密封动态性能影响研究
8.
It is of built-in type, single seal face, single spring and rubber-bellows mechanical seal.
内装式、单端面、单弹簧、橡胶波纹管机械密封。
9.
Numerical Analysis of a Laser Textured Micro-Pore Face Mechanical Seal;
激光加工多孔端面机械密封的数值分析
10.
Numerical Analysis of Face Deformation of a Laser Textured Micro-Pore Face Mechanical Seal;
激光加工多孔端面机械密封变形的数值分析
11.
Study on Monitoring System of Face Information of Non-contacting Mechanical Seals
非接触式机械密封端面信息的监测系统研究
12.
Measurement Methods for Frictional Torque of Mechanical Seals Based on LabView
基于LabView的机械密封端面摩擦扭矩的测量方法
13.
Numerical analysis of laser textured mechanical seals with a porous sector face
多孔扇形分布端面机械密封性能的数值分析
14.
Experimental Study of Mechanical Seal Face Stability in Changing Conditions
变工况条件下机械密封端面稳定性实验研究
15.
Acquisition and analysis system of the face information of mechanical seal face based on LabVIEW
基于LabVIEW的机械密封端面信息采集与分析系统
16.
Double seals: Material code for the secondary seal is directly followed by the product seal face codes.
注：双端面机械密封的型号表示方法为：在产品型号规格的后面书写两组材料代号，用横线相连。
17.
mechanical seal with low back pressure
背面低压式机械密封
18.
End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing
GB/T5661-1985轴向吸入离心泵机械密封和软填料用的空腔尺寸