1.
Construction and Management of Tool Library and Interactive Operation in Virtual Environment;
虚拟环境下装拆工具库的构建、管理与交互实现
2.
Upper Main Bearing Removal and Installation with Tool C-3059
用工具C-3059进行上主轴承拆卸与安装
3.
Hydraulic Valve Tappet Removal/Installation Tool
液压阀推杆拆卸/安装工具
4.
It is not advisable to attempt to replace camshaft bearings unless special removal and installation tools are available.
不要试图更换凸轮轴轴承，除非能够使用特殊的拆卸和安装工具。
5.
Remove push-in fastener attaching trim cover to door inner panel (use special tool C-4829).
拆下把装饰盖板固定在车门内板的压入式钩扣（用特殊工具C-4829）。
6.
Application of the Teaching mode of"Work Process Direction"in Practice of Dismantl-and-Assemble of Molding Tool;
“工作过程导向”教学模式在模具拆装实训中的应用
7.
Remover, Moldings C-4829
拆卸工具，嵌条C-4829
8.
taper coordinated oil-pressure dismantler
锥度配合油压拆卸工具
9.
Remove tool from rack piston.
从齿条活塞上拆下工具。
10.
Slide Hydraulic Tappet Remover/Installer Tool C-4129-A through opening in cylinder head and seat tool firmly in the head of tappet.
将液压挺杆拆卸/安装工具C-4129-A滑入汽缸盖开口，在挺杆头内将工具安置牢固。
11.
One that removes tops or puts tops on.
卸顶工，装顶工拆除或安装顶状物的人
12.
This toy can be taken apart and put together with ease.
这个玩具既容易拆开又容易组装。
13.
An applicant shall be responsible for the preparation of the tools and place for the sampling, and the move, stack transfer, opening and repackage, etc.
报验单位应当负责抽样所需工具和场地的准备，以及抽样时的搬移、倒垛、开拆和恢复包装等事项。
14.
File is too big. Please use 'Splitter Utility' before opening.
文件太大。请用“拆分器实用工具”打开。
15.
You'd need the right kind of tools to fix that."
没工具，谁也拆不开大链套呀。”
16.
Remover Tie Rod End MB–991113
MB–990635号拉杆端拆卸工具
17.
General specification for hydraulically operated rescue tools
液压破拆工具通用技术条件
18.
Design of special hydraulic system for disassembly tool on excavator
液压挖掘机拆除工具专用油路的设计