1.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈
2.
Lock ring with scre
GB/T884-1986螺钉锁紧挡圈
3.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
4.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
5.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
6.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
7.
piston pin snap ring
活塞销锁圈, 活塞销扣环
8.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
9.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
10.
Revamp of locking for dia 2200 cone crusher
φ2200圆锥破碎机锁紧装置改造
11.
Lock rings at the end of shaft with scre
GB/T891-1986螺钉紧固轴端挡圈
12.
Lock rings at the end of shaft with bolt
GB/T892-1986螺栓紧固轴端挡圈
13.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
14.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
15.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
16.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
17.
Washers with cone face
GB/T850-1988锥面垫圈
18.
Rings for shoulder
GB/T886-1986轴肩挡圈