1.
Design and Research of Engine Variable Valve Timing Camshaft
对发动机可变气门正时凸轮轴的设计与研究
2.
Install the timing chain, crankshaft sprocket and camshaft sprocket with the timing marks aligne
安装正时链、曲轴链轮和凸轮轴链轮，使正时标记对齐。
3.
If chain is not satisfactory, remove camshaft sprocket attaching bolt and remove timing chain with crankshaft and camshaft sprockets.
若正时链不令人满意，则拆下凸轮轴链轮固定螺栓，并拆下曲轴和凸轮轴链轮的正时链。
4.
"Valve Service and Maintenance includes installing new seat inserts, cleaning or replacing valve guides, servicing the camshaft and camshaft bearings, and timing the valves."
气门维修包括镶配气门座,清洁或更换气门导管,保养凸轮轴和凸轮轴轴承,气门的正时调整。
5.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
6.
As the camshaft rotates, the lobe, or high spot of the cam, pushes against parts connected to the stem of the valve.
当凸轮轴旋转时，凸轮凸起的或者高点的位置，推动气门座。
7.
Replacing the camshaft requires about eight hours; four additional hours are required for replacing camshaft bearings.
更换凸轮轴需要8小时左右;更换凸轮轴轴承需要额外增加4小时。
8.
The job of the timing belt is to turn the camshaft(s) at exactly 1/2 the speed of the crankshaft while maintaining a precise alignment.
正时皮带的工作是:当保持精准定位时调整凸轮轴的运转速度为曲轴速度的一半.
9.
overhead cam shaft
上凸轮轴上部凸轮轴
10.
Certain engines with overhead camshafts have timing belts that have a limited life span.
顶制凸轮轴结构的汽车发动机都配备了正时皮带，并且这个皮带的生命周期是有限的.
11.
Application of Biconvex Cam Sine Acceleration Framework in Metallic Roller Printing Equipment
双凸凸轮正弦加速度机构在金属筒体印花设备上的应用
12.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
13.
To Realize Complicated Predeterminate Curve of Points on Coupler with Cam Revisory
实现复杂的预定连杆曲线的凸轮修正法
14.
A Simple procedure for Modifying High-Speed Cam profiles for Vibration Reduction
减少振动高速凸轮廓线修正的简易方法
15.
Digital design of cylindrical end cam based on curve fitting and correction
基于曲线拟合修正的圆柱端面凸轮数字化设计
16.
Solid Modeling and Numerical Control Machining of Sine Groove Cone Cam Based on MasterCAM
基于MasterCAM的圆锥正弦槽凸轮实体造型与数控加工
17.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
18.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置