1.
centrifugal casting pipe for stay bolt
贯穿螺栓离心铸造管
2.
Remove the engine front mount thru-bolts.
拆下引擎前座贯穿螺栓。
3.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
4.
cap-and-pin type insulator
帽盖穿心螺栓式绝缘子
5.
Centrifugal casting ductile iron pipe
GB/T13295-1991离心铸造球墨铸铁管
6.
hydraulicdevice for tightening tie-bolt
贯穿螺栓上紧用液压装置
7.
An Example of Recovery of Coated Die for Centrifugal Cast Small-Bore Pipes
涂料金属型离心铸造小口径管铸型再生一例
8.
Shear Behavior of High-Strength Bolts Penetrated Through Concrete-Filled Thin-Wall Square Steel Tube Column with Ribs
薄壁设肋方钢管混凝土柱穿心高强螺栓的抗剪性能
9.
high frequency auto centrifugal casting furnace
高频自动离心铸造炉
10.
horizontal arm hanging type centrifugal casting machine
悬臂卧式离心铸造机
11.
Arsenal process
阿塞诺炮筒离心铸造法
12.
Study on Pre_Processing and Post-processing Software Used for Solidification Simulation of Double-metal Composite Pipe Made by Centrifuge Casting;
离心铸造双金属复合管凝固模拟前后处理研究
13.
INFLUENCE OF Cr,As ON METALLOGRAPHIC STRUCTURE OF WATER-COOLED METAL-TYPE CENTRIFUGAL CASTING NODULAR-CAST-IRON PIPE
Cr、As对水冷金属型离心铸造球墨铸铁管金相组织的影响
14.
Remove the bolts and lift the pan off the manifolDiscard the gasket.
拆下螺栓并举高盘脱离歧管。扔掉衬垫。
15.
Research on Bolt Calculation in Forging Flanges Used in Steel Tube Tower
钢管塔锻造法兰连接螺栓的受力计算
16.
Cast-iron pressure pipe centrifugally cast in sand-lined molds
GB/T3421-1982砂型离心铸铁管
17.
Application of High Temperature Heat Pipe in Cooling the Mould for Gyro Knife
高温热管在陀螺刀铸造上的应用分析
18.
Flared type tube fittings--Inverted flare bolts
GB/T5650-1985扩口式管接头空心螺栓