1.
Dynamic Characteristic Analysis for Abrasion of Stator End Winding of 150MW Air Cooled Turbogenerator
150MW空冷汽轮发电机定子绕组端部磨损动态特性试验分析
2.
If the washing machine tubs were chipped or damaged, then the abrasive damage to the cuff edge was greatly increased.
当洗衣机桶部破损时，袖口的磨损增大。
3.
Trial use of rubber lining plate at the end of ball mill 1~#
1~#球磨机端部橡胶衬板试用效果
4.
The testtube stopper plugging its end has worn down.
义肢末端本来镶了试管塞子，可是磨损了。
5.
The Study of End-face Friction & Wear Experiment Online Testing System;
端面摩擦磨损试验在线检测系统的研究
6.
Analysis of roller end wear question for high speed short cylindrical roller bearing
高速短圆柱滚子轴承滚子端面磨损问题分析
7.
Failure analysis of chute abrasion in scraper conveyor and anti-wear measures
刮板输送机中部槽磨损失效分析与抗磨措施
8.
The engine parts will wear down if not properly cared for.
"若未妥善照料,引擎的部分将会被磨损。 "
9.
he was in the forefront; he was at the head of the column.
钻杆的最前部都已经磨损了。
10.
Most of the paint has been scratched away by heavy wear.
由于磨损严重, 大部分油漆已剥落。
11.
Inspect and replace worn or damaged parts as necessary.
检查并且更换需要更换的磨损或损坏的部件。
12.
CONCLUSIONS: When using the attachment prostheses to restore the type of the second molar distal-extension for the patient, we can use one teeth as abutment.
结论:用该附著体修复第二磨牙末端游离缺损时,可采用单基牙。
13.
Study of Digital Intelligent Testing & Control Technology of HDM-10 End-Face Friction & Wear Experiment Machine;
HDM-10端面摩擦磨损试验机数字化智能测控技术研究
14.
The great part among faults was serious wear of graphite bearing, or even cracked.
其中大部分故障是石墨轴承磨损严重,甚至开裂。
15.
Rail Head Abrasion Monitoring System based on figure technology
基于图形技术的钢轨头部磨损监测系统
16.
Lower Part of Classifier into Slurry Wear Bearing Device and Its Prevention
分级机下部支座装置进浆磨损及其预防
17.
Relationship of noncarious cervical lesions and sleep bruxism
磨牙症与非龋性牙颈部缺损的相关性研究
18.
Numerical calculation of internal flow and wear analysis of pre-riser
预提升管内部流动的数值计算及磨损分析