1.
A Study on Microstructural Characteristics during Hot Processing of GH864 Superalloy
GH864合金热加工过程中组织特征研究
2.
The Preparation of Glass-Ceramic Protective Coating and the Applying in Ti Alloy Heat Treatment Process;
玻璃—陶瓷保护涂层的制备及在钛合金热加工过程中的应用研究
3.
The Microstructure Evolution and the Crack Initiates and Propagates Mechanism of TC11 Alloy during Hot Process;
TC11热加工过程中组织演变的规律及裂纹形成的机理
4.
Research on the Microstructure Evolution and Simulation of TC21 Titanium Alloy in the Hot Working Process;
TC21钛合金热加工过程的微观组织演变及模拟研究
5.
In a hot-working process, the metal is brought to the viscous or plastic state by subjecting it to elevated temperature, and by the use of pressure it flows without fracture .
在热加工过程中，将金属升温，使其处于粘性即可塑状态，再加压使其流动而不折断。
6.
Study of Online Simulation and Supervisory Optimization in Metallic Work s Heating Process;
金属工件加热过程的在线仿真与监控优化研究
7.
The Focus and Development of research on Reading Disabilities as Cognitive Processing deficit;
当代阅读困难儿童认知加工过程研究的热点
8.
Application of Excel to heating time calculation and quality inspection of workpieces
Excel在工件的加热及质量检验过程中的应用
9.
Microstructural Evolution and Process Optimization of Q345E Steel During Heating and Rolling;
Q345E热轧带钢加热及轧制过程组织演变和工艺优化
10.
Analysis of the Heat Loss of Heat Processing of Agricultural Products in the Pipeline Transmission
农产品加工的供热管道在传输过程中的热损耗分析
11.
a workplace where metal is worked by heating and hammering.
通过加热和锤打来加工金属的工厂。
12.
Heating of air, suited to drying up certain powder, chemical engineering process and jet drying under certain pressure.
空气的加热，适用于一定压力下，一些粉末干燥、工过程及喷射干燥。
13.
Investigation on Heat Transfer and Flow Characteristics of Polymer in the Extrusion Processing;
聚合物在挤出加工过程中的传热及流动特性研究
14.
Investigation on Flow and Heat Thransfer Characteristics of Rubber Compound in the Extrusion Processing;
混炼胶在挤出加工过程中的流动和传热特性研究
15.
the process of extracting moisture (as by heat).
通过加热使物质失去水分的过程。
16.
NUMERICAL SIMULATION OF HEAT FIELD IN LENGTHWISE GRAPHITIZATION FURNACE DURING HEATING PROCESS
内热串接石墨化炉加热过程热场数值模拟
17.
friction of metal working
塑性加工过程的摩擦
18.
exacting procedure
要求严格的加工过程