1.
deep flexible I-beam
挠性加强窄缘工字梁
2.
A steel joist or girder with short flanges and a cross section formed like the letter I.
I形金属横梁，工字梁由短翼缘和一个十字部分做成象字母I的钢制托梁或主梁
3.
Static Behavior of a New Type of I-Beam with a Rectangular Tube Top Flange
上翼缘为矩形管的新型工字形梁静力性能分析
4.
Elastic Buckling of Web Plates in I-girders under Combined Stresses Considering of the Restriction from the Flange to the Web;
考虑翼缘约束作用的工字梁腹板在复合应力作用下的弹性屈曲
5.
Experimental Reasearch on Static Behavior of I-Beam with a Rectangular Steel Tube Top Flange
上翼缘为矩形钢管的工字形梁静力性能的实验研究
6.
Experimental Reasearch on Static Behavior of I-Beam with a Rectangular Concrete-Filled Tube Top Flange
上翼缘为矩形钢管混凝土的工字形梁静力性能的实验研究
7.
Significance of the Density Control of PF Bonded Poplar LVL Used for Flange of Wood I-joist
木质工字梁翼缘用杨木-酚醛树脂LVL密度的控制意义
8.
steel I-Beam Bridge with reinforced concrete deck
工字钢梁混凝土面桥
9.
The main girders support I-section transverse ribs.
主梁支承着工字梁的横向肋。
10.
Construction Method of Post-pouring Flange Plate of Simple Box Girder in Passenger Dedicated Line
客运专线简支箱梁后浇翼缘板施工工法
11.
Designing basis of the static bending performance of Wood I-Joist for flooring of wooden houses
木结构楼板托梁用木质工字梁静曲性能的设计
12.
SEPARATING RESEARCH ON STABILITY CONDITION OF H-SECTION AND I-SECTION STEEL BEAMS
区别处理H型钢梁与工字钢梁稳定性条件
13.
The initial retrofit consisted of removing the gaps between the stringer flange and floor beam by providing shims.
最初的修复工作是通过垫片来消除纵梁翼缘和横梁之间的间隙。
14.
LATERAL STABILITY BEHAVIOR OF LIPPED H-SECTION BEAMS SUBJECTED TO MOMENTS
卷边翼缘工形截面梁的稳定性能及设计方法
15.
universal mill beam
万能轧机轧出的工字钢梁
16.
FE Analysis of Welded Steel Beam Strengthened by CFRP
CFRP加固焊接工字钢梁的有限元分析
17.
ELASTIC SHEAR BUCKLING OF WEB PLATES IN TAPERED I-GIRDERS
楔形工字梁腹板的弹性剪切屈曲分析
18.
Lateral Buckling of Web-Tapered I-Beams:A New Theory
工字形截面楔形梁的侧向屈曲:新理论