1.
On the Manufacturing of the CBN-E306 Gear Pump Shell;
CBN-E306齿轮泵壳体的制造
2.
FINITE ELEMENT ANALYSIS FOR THE CASING OF A 1300 HP SINGLE ACTION TRIPLEX DRILLING PUMP
胜利1300马力钻井泵壳体的有限元分析
3.
Analysis and Elimination of Sand Burning on Hydraulic Pump Case of Gray Cast Iron
液压泵壳体铸铁件粘砂的原因分析和对策
4.
Investigation on cooling of oxidizer pump case during coast period
高空滑行期间氧化剂泵壳体冷却方案研究
5.
double-case vertical centrifugal oil pump
双壳体立式离心油泵
6.
hydraulic oil pump driving device housing
液压油泵传动装置壳体
7.
3-Dimensional Viscous Fluid Flow in a Volute of Centrifugal Oil Pump;
离心油泵蜗壳内部三维粘性流体流动
8.
Development and Application of Program for Strength Calculation of Volute Case of Pump;
涡壳式泵体强度计算应用程序开发与应用
9.
Centerline discharge pump casings are not acceptable. The pump casing shall have an integrally cast hand hole supplied with a hand hole cover.
中心线排放泵壳是不可接受的。泵壳上应该具有整体铸造的探孔,并配置探孔罩盖。
10.
Primary heat transfer shall be accomplished by convection through the reservoir wall to the pumped fluid.
最初的热交换应该通过贮存器壳与泵抽液体的对流来完成。
11.
Research on Vibration and Noise Reduction of Axial Piston Pump Based on Structure Optimization of Pump Housing;
基于壳体结构优化的轴向柱塞泵减振降噪技术研究
12.
double entry split casing centrifugal pump
揭壳式双进水口离心泵
13.
horizontal single-stage double-suction volute pump
卧式单级双吸蜗壳泵
14.
Analysis and Solution of the Pump Barrel Leak of Ethylene Delivery Pump
乙烯输送泵泵壳泄漏故障分析及改造
15.
"Gaskets are also used to seal joints between other parts, such as between the oil pan, manifolds, or water pump and the Block."
密封垫也同样用于密封其它部件之间的接合处,例如,油底壳、歧管、水泵与气缸体之间的密封。
16.
Pump body &pump casing made by alloy copper and stainless steel. reliable and corrosive-resist.
泵机体，马达外壳，以炮金铜及不锈钢材质制成，坚固耐蚀，轴心不锈钢304。
17.
Pump case are welded castings steel and steel plates.
泵壳是由铸钢与钢板焊接而成的。
18.
3-D Turbulent Flow Calculation within a Centrifugal Pump Volute;
离心泵蜗壳内部三维湍流场数值模拟