1.
Study on the Molding Process of the Fe-Si Intermetallics Compounds Inner-heating Casing to Improve Thermal Shock Resistance
提高Fe-Si金属间化合物内加热套管抗热震性的成型工艺研究
2.
Welding Process Test and Application of Bottom Head and Heater Sleeve in Pressurizer
稳压器下封头与加热套管的焊接工艺试验及应用
3.
Numerical Simulation of Induction Heating Process for Shrink Fitting Based on ANSYS Software
基于ANSYS的曲轴红套感应加热数值模拟
4.
The tubular-cased heating element is the same type as those used in cook stoves.
套管式加热元件与电烤炉中所用的相同。
5.
Hot Working Windows of High Collapse Casing Steel Evaluated by Gleeble Simulation Techniques
高抗挤套管用钢热加工工艺的模拟研究
6.
Application and Modification of the Lye Sleeve Pipe Heater in Two-stream Digestion Process
碱液套管加热器在“双流法”溶出中的应用与改进
7.
The paper introduces the structure character, the design procedure and the economic benefit of the heating platform in detail.
详细介绍了加热平台的结构特征和设计步骤以及这套加热平台所带来的经济效益。
8.
This software has been used in a biological fermentation device with stirring and sandwiching heating features.
该软件应用于带搅拌的夹套式加热的生物发酵装置。
9.
Studies on the Catalysts for Catalytic Combustion of Propane and the Infra-red Heater for the Casting Head Gas;
丙烷催化燃烧催化剂的研究和油井套管气红外加热器的研制
10.
REASONS FOR LEAKAGE OF INTERNAL PIPE OF DOUBLE-PIPE HIGH PRESSURE AMMONIA HEATER AND TECHNICAL IMPROVEMENT
套管式高压氨加热器内管泄漏原因分析及技术改进
11.
a mild pre-heating of the whole socket area is recommended. apply heat to parts to be joined. The preferred method is by oxy-acetylene flame.
建议对整个管套区域进行适当的预热。建议采用乙炔火焰对连接部件进行加热。
12.
Thermoplastic toe puff applying machine
热熔胶自动套头印置机
13.
jacketed-pipe high-pressure steam preheater
高压蒸汽套管预热器
14.
A coat is unnecessary on a hot day.
大热天不需要外套。
15.
Accelerate the realization of localization of design and manufacturing of whole set equipment for large panel hot/ cold tandem rolling and deep processing equipment and upgrade the whole set technological equipment manufacturing capacity.
加快实现大型板材冷热连轧成套设备及精深加工的设计制造国产化，提高成套技术装备的总包能力。
16.
To furnish or line with a bushing.
加衬套于，加轴套于用一个轴套或套管来装饰或排列
17.
A welder's kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and temperature measuring pen.
一名焊工的成套工具包括焊钳、焊炬、面罩、手提式焊条加热箱和测温笔。
18.
Reducing the surface emissivity of a clothing ensemble is not in fact a very effective way of increasing its thermal insulation.
事实上减少整套服装的表面发射率并不是增加其隔热性能的最有效途径。