1.
high pressure airless heating pasted type spraying machine
高压无空气加热厚浆型涂料喷涂机
2.
Spraying method whether by air spray, airless spray, hot air spray or hot airless spray should be in accordance with the following.
空气喷涂，无空气喷涂，热空气喷涂或无空气热喷涂均应遵循以下原则。
3.
gun-applied furnace insulation
喷涂的加热炉绝热材料
4.
Spaying governs in this coating sequence, and rolling painting as complementary.
本工程的油漆涂装方法以高压无气喷涂为主，滚涂为辅。
5.
Thermal spraying coating Nondestructive methods for measurement of thickness
GB/T11374-1989热喷涂涂层厚度的无损测量方法
6.
Study on Ultrasonic NDT Method of the Thickness of Coated Layer in Thermal Spraying;
热喷涂涂层厚度的超声无损检测方法研究
7.
High Temperature Oxidation Behavior of APS Thermal Barrier Coatings
大气等离子喷涂热障涂层高温氧化行为研究
8.
Research Preparing and Function of High-performance Ceramic Coating for Thermo-spraying
高性能陶瓷热喷涂料制备与性能研究
9.
A study and application of composite grouting material as air tight coating material in entries retained at gob-sides
沿空巷道喷涂隔风复合浆体材料研究及应用
10.
High Temperature Behaviors and Aluminum Diffusing Mechanism of Containing Aluminum Coatings Produced by Thermal Spray;
含Al热喷涂涂层的高温表现与Al扩散机制
11.
Effects of Hot Pressed Treatment on Microstructures and Thermal Properties of Spraying SiC_p/Al Composites
热压对喷涂SiC_p/Al复合材料组织和热性能的影响
12.
Designation of the materials for thermal spraying coatings
GB/T12608-1990热喷涂涂层材料命名方法
13.
Sealing Material and Anti-acid-corrosion Properties of the Thermal Spraying Coating
热喷涂涂层封孔材料及其耐酸蚀性能
14.
Crack Control of Thick Fire Resistive Coating in High Altitude Steel Structure of Wenzhou International Business Center
温州世贸中心高空钢结构厚型防火涂料防开裂控制
15.
hot venetian type ship bottom paint
热喷涂溶解型船底漆
16.
Study on the Preparation of the Organic and Inorganic Compound Coating with Corrosion and High Temperature Resistance;
新型有机-无机复合耐蚀耐高温涂料的制备研究
17.
with heat-resistant, non-poisonous and non-tacky coating on its inner surface and with non-poisonous and acid and alkali-resistant coating of brilliant color on its outer surface.
内表面喷涂耐高温、无毒、无粘性的涂层,外表面喷色泽鲜明的涂料,既耐酸、耐碱又无毒性。
18.
The coating is sprayed onto the specimen, air-dried to a soft powder.
这种涂料喷涂到试件上去并在空气中干燥之后，即成为松软的粉末。