1.
roll nut adjusted quick grip pliers
螺母调节快速夹紧卡钳
2.
screw adjusted quick grip pliers
螺钉调节快速夹紧卡钳
3.
Never use pliers on a nut, while an adjustable spanner should only be used as last resort.
哪怕只有可调节的扳手才能奏效时，也一样不要用老虎钳来拧螺母。
4.
Design and calculation of the clip of the screw rod motor test stand used in the well
井底螺杆马达试验台架夹紧钳的设计和计算
5.
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
6.
clamped as in a vise.
像被钳子夹紧了一样。
7.
Tighten the pressure regulator.
请拧紧压脚调节螺丝。
8.
To Readjust- Loosen lock nut on the adjusting screw.
重新调节：松开调节螺丝上的锁定螺母。
9.
Install adjuster nut and lock nut.
安装调节器螺母和防松螺母。
10.
A tool for clinching nails, screws, or bolts.
紧钳固定钉子、螺丝或螺丝钉的工具
11.
threaded type track bolt nut chuck
螺纹式轨道螺母夹头
12.
The opening between the jaws of a vise or other holding or gripping tool.
钳口钳子或其它起固定或夹紧作用工具的钳口之间的空间
13.
A mechanical device that grasps and holds.
夹，钳，夹具能抓牢或握紧的一种机械装置
14.
The circle indicates the squeezing of its robotic grip; as the force of the grip increases, the circle widens.
圆周表示机器人的手钳夹紧；夹力增加，圆圈扩大。
15.
Clamp the two pieces of wood together until the glue dries.
用夹钳把两块木板夹紧, 等胶水干了再松开。
16.
Move the feed dog up or down to perform adjustment, then securely tighten the screw.
上下移动送布牙调节高度，然后拧紧紧固螺丝。
17.
Conceptual Design of A Fast Clasping Mechanism Based on QFD;
质量功能配置下的快速夹紧装置概念设计
18.
shutter speed ring
快门速度调节环(摄影)