1.
Analysis on Samples of Clogged Horizontal Cast Billets Pierced by Conical Piercer
菌式穿孔机穿轧水平连铸坯时轧卡试样的分析
2.
The Frequency Conversion Rebuilding of 102-180 Baking Machine of Three-pillar Water Rolling;
102-180三柱轧水烘干机的变频改造
3.
Application of GE Fanuc in Water Treatment of No.4 Steel Making and Rolling Plant of Maanshan Iron & Steel Co., Ltd.
GE Fanuc在马钢四钢轧水处理中的应用
4.
powder enamel vase with medallion landscape design and concave lines
粉彩轧道开光山水瓶
5.
Improvement the Cut Water Equipment of the Work Roll of the 1750mm Hot Rolling Finishing Rolling Mill in Bayi Steel
八钢1750m m热轧精轧机工作辊切水装置的改进
6.
high moisture content measuring and controlling unit
高含水率控制装置（监控轧车轧余率或预烘后织物含水率等）
7.
water-repellent rayon gabardine surcoat
抗水人造丝轧别丁绸中大衣
8.
breathing pad roller
微孔弹性辊（又称排吸水轧辊）
9.
Study on Rolling Process of AZ31 Mg Alloy Plate Fabricated by Horizontal Continuous Casting;
AZ31镁合金水平连铸板材轧制工艺研究
10.
Application of STEP7-400 in Cold Rolling Demineralization Pump Station
STEP7-400在冷轧除盐水泵站的应用
11.
Regarding Chemical Treatment of Hot-rolled Plant Muddy Water of Central
关于化学法处理热轧厂浊环水的探讨
12.
Preliminary discussion on the treatment technology of JISCO stainless steel hot rolling turbid circulating water
浅谈酒钢不锈钢热轧浊环水处理工艺
13.
Study on the application of bioaugmentation to cold rolling wastewater
生物强化技术处理冷轧废水实践研究
14.
Discussion on New Thought for Disposal of Oil-containing Emulsion Waste Water from Cold Rolling
冷轧含油乳化液废水处理新思路探究
15.
Effect of cooling water and iron scale on roll wear
冷却水和氧化铁皮对轧辊辊耗的影响
16.
WATER-CROSSING REFORMATION OF TWO-SPLITTING ROLLED REINFORCED BAR OF Φ12mm
二切分Φ12mm螺纹钢轧后穿水改造
17.
Practice of Operation and Management of Treating Waste Water Bearing Oil, Acid and Alkaline from Cold Rolling Plant
冷轧含油酸碱废水处理运行管理实践
18.
It is necessary to setup water cooling system in finish rolling area to limit finished temperature of hot strip.
为了严格保证带钢终轧温度,应在精轧机组间设置喷水冷却装置。