1.
off-set die head
直角机头(压出机)
2.
Influence of structural parameters of T die to the flow balance
直角机头流道结构参数对流动平衡的影响
3.
Her head bent in thought, she mechanically twisted the tail of her jacket between her fingers.
她低了头，手指头机械地卷弄她的衣角。
4.
a camera lens having a wider than normal angle of view (and usually a short focal length).
带有比普通的视角宽的照相机镜头。
5.
Of, having, or being a camera lens with a relatively short focal length that permits an angle of view wider than approximately70=.
广角的照像机镜头的，有或作为照像机镜头的，这种镜头带有可使视角宽于约70度的短焦距
6.
Believe it or not, this new digital camera has a wide angle lens.
不管你信不信,这新的数位相机有广角镜头.
7.
Optimizing Design on Punch Cone Angle of Motor Commuter
电机换向器整体冷锻模冲头端部锥角优化设计
8.
Effects of Camera Assembly Angle to Robot Working;
摄像头安装角度对机器人作业的影响分析
9.
Control Attitude Angular Velocity for High-rolling Projectile by Moving-Mass Framework
滑块机构下高旋弹头的姿态角速度控制
10.
Variable structure guidance law of reentry maneuvering warhead with terminal angular constraint
带落角约束的再入机动弹头的变结构导引律
11.
The machine is mainly used for extrusion and connection of45° seam casement window with angle joint structure.
铝门窗单头组角机主要用于角码结构的平开门窗45°缝的挤压联结。
12.
The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.
门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。
13.
Decreasing the risk of ventilator-associated pneumonia through head of bed elevation
床头角度对插管机械通气患者呼吸机相关性肺炎发病率的影响
14.
counterbore for hexagon socket head bolt
内六角头螺栓埋头孔
15.
to strike, thrust or shove against, often with head or horns.
用头或角击，戳，挤。
16.
Fit hinge 5 into the opening in the machine bed, and fit the machine head to table rubber hinge 6 before placing the machine head on cushions 7 on the four corners.
把铰链5放到机台的孔上，对准台板橡胶支座6，把头部放到四角的机头胶垫7上。
17.
bit cutting angle
钻冠的尖度，钻头磨角，钎子头刃角
18.
The machine head can be adjusted for angle cutting and milling flutes to have the precise angles and round connecting piece.
该机头可左右调整斜切或铣槽，角度准确，管子接口完美省工。