1.
negative cam-controlled dobby
消极式凸轮控制多臂机
2.
arm type cam roller mechanism
摇臂式凸轮滚轮机构
3.
THE ANALYSIS AND DESIGN OF YOKE-CAM-ACTIVATED DOBBY SHEDDING MECHANISM
等径凸轮式高速多臂机的分析与设计
4.
Modal analysis of frame of cantilever NC assembling machine for assembled camshaft
装配式凸轮轴悬臂式数控装配机的机架模态分析
5.
The lift of the heddles can be achieved by using cam or dobby operated harnesses and each has its own limitations.
可以采用凸轮或多臂来控制综框的升降,但这两种方式都有自身的局限性。
6.
cam throttle control
节流阀凸轮控制机构
7.
Development of NC Assembly Machine and Research on Joining Technology for Assembled Camshaft;
装配式凸轮轴连接技术研究及数控装配机研制
8.
Schwabe's box loom
施瓦贝凸轮式多梭箱织机
9.
cam shaft displacement control for reversing engines
可倒转发动机的凸轮轴位移控制器
10.
Control of Electro-Hydraulic Camless Valvetrain System;
无凸轮电液驱动配气机构的控制研究
11.
The Realization Method of PLC Simulate Mechanical Controlled Cam;
PLC模拟机械控制凸轮的实现方法
12.
Finite Element Analysis and Optimum Design of the Cantilever Frame of the Camshaft Assembling Machine
凸轮轴装配机悬臂式机架的有限元分析及优化设计
13.
Sometimes the camshaft is fitted directly into the cylinder head and operates on the valves without rockers.
有时，凸轮轴直接安装在气缸盖上并且不用摇臂控制阀门工作。
14.
The fast-idle cam position is controlled by an arm on the choke shaft.
快怠速凸轮的位置是由阻风门轴上的杆臂控制的。
15.
Modeling for Doubly-Salient Electro-Magnetic Motor Speed Control System by Full-Bridge Converter and Control;
基于全桥变换器的电磁式双凸极电机调速系统的建模与控制
16.
Novel Control Strategy of Turn-on and Turn-off Angle Current Ratio for Doubly Salient Permanent Magnet Motor
永磁式双凸极电机新型开通关断角控制策略的电流比研究
17.
Development of QLY2150 Wheel-Type Boom Crane for Wind Power
QLY2150型风电专用轮胎式动臂吊机研制
18.
Study on Doubly Fed Variable Speed Salient Pole Synchronous Generator and Its Control;
双馈变速凸极同步电机及其控制研究