1.
lockopen device
锁定在开启位置的装置
2.
pinned open position
销钉固定的开启位置
3.
The PCV valve sticks in the open, maximum-flow position.
把PCV阀固定在开启位置即最大流量位置。
4.
When the handwheel is rotated toward the open position the upper stem is moved away from the diaphragms allowing the spring to push the lower stem away from the seat.
当手轮象开启位置旋转时，上阀杆离开横膈膜，弹簧推动下阀杆离开阀座。
5.
Update Telephony Location upon startup and power-resume
启动和重新打开电源时更新电话位置
6.
The valve may be padlocked in full open or full closed position.
可以把阀门锁定在完全开启或完全关闭的位置。
7.
Position key cylinder into steering column as it would normally be in the ON position.
将钥匙柱放入转向柱中，其正常应该在ON（开启）位置。
8.
"After the engine starts and the ignition key is released, spring pressure returns it to the ON position."
发动机启动以后,点火钥匙回转,在弹簧的压力下,恢复到"开启"位置。
9.
Insert the key in the ignition lock cylinder and turn the ignition switch to the On position.
将钥匙插入点火锁柱中，旋转点火开关到开启的位置。
10.
Open-close position indicator. Limit switches for remote indication.
开启-关闭位置指示器。适用于远程指示的限制开关。
11.
Internal stops provide positive over travel protection for power actuated valves and act as a reference to position the discs in the open and closed positions.
内置的止动装置为动力执行机构提供行程保护，并且作为参考坐标在开启和关闭位置定位阀瓣。
12.
When the altitude control senses a drop in level below the predetermined setpoint the valve opens to fill tank.
当水位控制器感应到水位下降到预置设置点以下时，则阀门开启，开始对容器注水。
13.
Limit switches can easily be attached to the yoke of the valve. The torque arm will actuate the switches in open and closed positions.
在阀门的轭架上，可以容易的附加限制开关。转距臂会将开关设置在开启和关闭的位置。
14.
Open test cock3. EZ-TC on test cock3 would already be open. The water should maintain its position in the sight tube.
开启测试旋塞3号。测试旋塞3号上的EZ-TC应该已经开启。水应该保留在观察管内的位置上。
15.
Rising Stem– makes for easy visibility for open-close indications.
明杆（杆）-使得开启关闭指示器处于容易看到的位置。
16.
The stem position indicates to the observer if the valve is opened or closed.
阀杆位置的高低,指明了阀门处于开启或关闭状态。
17.
a switch in the up position.
位于上升位置的开关
18.
out of position
站错位,离开了基本位置