1.
The unified formula results from the revolution and translational movement of the coordinate axis.
利用坐标轴的旋转和平移,导出了组合机床主轴箱多种传动形式下传动轴坐标计算的统一公式。
2.
A Discussion on the General Shifting Transformation and General Rotating Transformation of Moment of Inertia of Axis of Coordinate System;
论刚体对坐标轴转动惯量的平移和旋转变换
3.
revolution of polar to Cartesian
极坐标－直角坐标旋转
4.
A transformation of a coordinate system in which the new axes have a specified angular displacement from their original position while the origin remains fixed.
旋度一种坐标系的转变，新的坐标轴从原位置位移的一定角度而原点保持不变
5.
Demonstrate Lagrange Mean Value Theorem by Coordinate Revolution;
利用坐标的旋转变换证明Lagrange中值定理
6.
It uses a center origin and currently has a popup animation that rotates on the X axis starting at 180 degrees, going to 360, then resetting.
它使用一个中心起点和当前的弹出动画，它可以在X轴坐标上180度至360度旋转，然后重置。
7.
The vertical axis of a two-dimensional Cartesian coordinate system.
纵坐标轴笛卡尔平面坐标上的纵轴
8.
A Method of 3D rectangular coordinate transformation adapted to any rotation angle
适用于任意旋转角的三维直角坐标转换方法
9.
The rotational inertias of uniform rotational rigid surfaces about the around axis
均质旋转面绕旋转轴转动的转动惯量
10.
Based on a5- axis NC grinding machine for rotary burrs developed by the Tianjin University, the4- axis NC grinding technology for rotary burrs is researched.
在天津大学研制的五坐标旋转锉刃磨机床的基础上，研究了旋转锉的四坐标数控刃磨技术。
11.
A Solution to the State Equation of Motor in the Step Rotatory Coordinate Series
阶跃旋转坐标系中电机状态方程式的解
12.
The Rotating Transition of Coordinate in Solving Conjugate Tooth Profile by the Means of Gear Shape;
用齿形法求解共轭齿廓的坐标旋转变换
13.
Numerical simulation of continuous rotating detonation engine in column coordinate
圆柱坐标系下连续旋转爆轰发动机的数值模拟
14.
Optimal Control of a Rotary Crane with Straight Transfer Transformation Based on Coordinate Alternate
基于坐标变换的旋转起重机直线搬送最优控制
15.
Study on Vector Diagram of AC Doubly-fed Machine in MT Rotating Coordinate System
交流双馈电机在MT旋转坐标系中的矢量图研究
16.
The rotational angle of a ball around its rotational axis.
转轴角-----球旋转时转轴的水平角度。
17.
The part of a vertical shaft that turns in a bearing.
轴踵轴承中能旋转的垂直的轴
18.
All loading pads shall be capable of pivoting in relation to the direction of the applied force and the pivot point shall be as close as practically possible to the load surface.
所有的坐垫要能够做到相对于用力方向的绕轴旋转以及该旋转点要和承载面尽可能地靠拢。