1.
Heat transfer in rectangular pin-finned channel with perforated plate
带射流孔板矩形扰流柱通道内的壁面换热
2.
Experimental Study on the Law of Jetting Boost Pressure in Hydrajetting
水力喷射孔内射流增压规律试验研究
3.
Influence on Multiport Buoyant Jet of Thermal Water at Different Velocity Ratio in Co-flowing
同流中不同流速比对多孔热浮射流的影响
4.
Investigation of velocity fields in a jet-in-cross-flow by using ridge-shaped tabs
气膜孔内置扰动条作用下的射流-横流流场
5.
Experimental Study on Rock Breaking Parameters of Combined Swirling and Round Jet
直旋混合射流破岩钻孔参数试验研究
6.
An experimental study of drilling small and deep blind holes with an abrasive water jet
磨料水射流钻削深小盲孔的试验研究
7.
THEORETICAL MODEL FOR SHAPED CHARGE JETS PENETRATION AND CAVITY RADIUS CALCULATION
聚能射流侵彻的理论模型与孔径计算
8.
Application of high pressure water jet penetration perforation technology in Jiangsu Oilfield
高压水射流深穿透射孔技术在江苏油田的应用
9.
Study on the Flow Mechanism and Heat Transfer Characteristics of the Multiple Turbulent Jet-to-Crossflow;
多孔横向紊动射流流动机理与传热特性的研究
10.
Numerical Simulation of Multipie Thermal Water Buoyant Jets in the Near Field in Coflow;
同流中多孔热水浮射流近区的数值模拟
11.
Investigation of characteristics of multi-ports thermal buoyant jet in co-flowing surroundings
同流多孔热水浮力射流排放特性实验研究
12.
Study of Coupling Flow in Perforated Horizontal Well with Flow in Reservoir
射孔水平井流动与油藏渗流的耦合研究
13.
Experimental investigation on discharge coefficient of jet impingement holes within semi-confined channel
半封闭通道射流冲击孔流量系数的实验
14.
Effects of air injection on outlet flow field of compressor cascade
孔隙射流结构对扩压叶栅出口流场特性的影响
15.
Design of Multijet for Large Scale Oxygen Lance of Converter and Its Feature of Supersonic Jet
大型转炉氧枪多孔喷头的设计与其射流特性
16.
Mathematical Model of Velocity Distribution in Flow Field of Multijet for Large Scale Oxygen Lance
大型多孔氧枪喷头射流速度分布的数学模型
17.
Study on Mold-filling Flow and Technique of Microcelluar Foam Injection Molding;
微孔发泡注射成型充模流动及工艺研究
18.
Emulsion Prepared by Two-Stage Ceramic Membrane Jet-Flow Emulsification and Preparation of Porous Ceramic;
二次射流陶瓷膜法制乳及多孔陶瓷的制备