1.
Laboratory study and mill trial of mini_coating of writing paper have been carried out.
进行了书写纸微量涂布工艺技术的实验室研究和工厂试验。
2.
The common paper flaw and processing technique controlling of coated manila
涂布白纸板常见纸病及生产工艺控制
3.
Study on Arc Spraying Technology and the Performance of Spray Coat;
电弧喷涂工艺及喷涂涂层性能的研究
4.
Electrical Control Design of Automatic Control System of Coating Machine Dryer Based on Optimal Process Parameters
基于最优工艺参数的涂布机干燥箱自动控制系统的电控设计
5.
The development of PP synthetic paper for ink-jet printing was conducted in this paper. Coating furnish and coating technology were discussed in detail in the paper.
本文叙述了喷绘写真PP合成纸的试制过程中,涂料配方的确定及涂布的工艺参数。
6.
Press polishing ?to polish on the surface of printed matter by pressing.
压光——在印刷品表面上涂布上光涂料之后，再经过压光机进行压光工艺。
7.
Process and Performance of Plasma Sprayed Graded ZrO_2 Coating;
等离子喷涂ZrO_2梯度涂层的工艺与性能
8.
An Investigation in Processes and Properties of Detonation Gun Sprayed WC Coatings
爆炸喷涂碳化钨涂层工艺及性能研究
9.
Optimization of Plasma Spraying Process Parameters for Cr_3C_2-NiCr Coating
Cr_3C_2-NiCr涂层等离子喷涂工艺参数的优化
10.
Finishing Process of Powder Coatings for Medium Density Fiberboard
中密度纤维板粉末涂料涂装工艺研究
11.
Process Control of Pretreatment before Spraying Powder Paint on Aluminum Profiles
铝型材喷涂粉末涂料前处理工艺控制
12.
Research on Coating Process for Cold-mould of Centrifugal Casting Cast Iron Roller
离心铸铁轧辊冷型涂料涂敷工艺研究
13.
Technological process of the pneumatically-pigsqueezed liquid inner coating for steel pipeline
钢质管道液体涂料内涂层风送挤涂工艺
14.
Studies on the Cold Spray Preparation Process and the Performance of the Mental/ceramic Coatings;
冷喷涂金属/陶瓷涂层制备工艺及涂层性能研究
15.
A priming coat of paint or varnish used in artistic painting.
涂底，涂层用于艺术绘画中的涂底漆的画布或画板
16.
Selection of complex coating and application technology test for work pieces of hot dip galvanized steel
热镀锌钢工件复合涂层的选择与涂装工艺试验
17.
Technological process of inner coating for welded joint with liquid paint by special machine for steel pipeline
钢质管道内涂层液体涂料补口机补口工艺
18.
An Investigation in Processes and Physical Properties of Detonation Sprayed WC-Co Coatings;
爆炸喷涂WC-Co涂层的工艺及物理性能研究