1.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。
2.
case hardening grade alloy gear steel
渗碳(皮硬)级合金齿轮钢
3.
Gas Nitrocarburzing for 4Cr5MoSiV1 Steel
4Cr5MoSiV1(H13)钢的气体氮碳共渗
4.
Surface combined treatment of carbonitriding and B-C-N-RE multi-elements deep-penetrating on 20Cr steel firebrick die
碳氮共渗-深层稀土硼碳氮共渗复合处理在20Cr钢耐火砖模具中的应用
5.
Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;
合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究
6.
Study on the Process of Surface High Speed Steel Power Hacksaw Blade by Carborizing and Heat Treatment after Double Glow Plasma Surface Alloying Technique;
等离子表面高速钢机用锯条渗碳及热处理工艺研究
7.
Research Progress and Applied Prospect of Low Temperature Carburiding for Austenite Stainless Steels
奥氏体不锈钢低温渗碳技术的研究现状及应用前景
8.
Study on Optimizing the Tecnics of the Super Saturation Carburization on 20Cr Steel and a New Stype Super Saturation Carberization Steel;
20Cr钢超饱和渗碳工艺优化及一种新型超饱和渗碳钢的研究
9.
Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;
扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究
10.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
11.
Specification for carburizing steels of bearings
GB/T3203-1982渗碳轴承钢技术条件
12.
Study on Medium Carbon Steel Chromizing Gas Nitiding Process;
中碳结构钢镀铬气体渗氮可行性研究
13.
Research on Microstructure and Properties of Carburizing Alloy Steel Treated by Intensive Quenching Process
渗碳合金钢强烈淬火组织与性能研究
14.
Wear resistance of carburized and subsequently niobiumized 20CrNiMo steel
碳-铌复合渗20CrNiMo钢的耐磨性能研究
15.
Method for reducing black structure in 20CrMnTi steel after carburizing and quenching
减少20CrMnTi钢渗碳淬火黑色组织的方法
16.
Tooth fracture failure analysis of carburized 20CrMnTi steel gear
20CrMnTi钢渗碳齿轮断齿失效分析
17.
Effect of Shot Peening Treatment on the Performance of 18Cr2Ni4WA Steel
喷丸强化对18Cr2Ni4WA渗碳钢性能的影响
18.
Spheroidizing Process for Cementite of Steel T12 and Its Microscopic Structure
T12钢渗碳体球化处理及其显微组织