1.
controller bus address register
控制器总线地址寄存器
2.
ringing switch trunk address
振铃接续中继线地址
3.
Select the bus address used to detect the drive (use arrow keys).
请选择用于检测驱动器的总线地址(使用箭头键)。
4.
In order to address 1024 bytes, 10 address lines are needed.
为了对1024个字节寻址，需要10条地址线。
5.
The address for the thread ID is not correct.
线程 ID 的地址不正确。
6.
The address bus specifies the memory locations (addresses) for the data transfers.
地址总线为数据传输指明内存位置（地址）。
7.
A memory map is the addressing plan for the address bus bits.
存贮器布局就是地址总线各位的寻址平面图。
8.
Enter the Web page address for the manufacturer's online product catalog.
输入制造商在线产品目录的网页地址。
9.
"Called Line Address Modified Notification Facility
"修改的呼叫线路地址说明实用程序
10.
The memory address of the function that was run when the thread started.
在启动线程时所运行函数的内存地址。
11.
Diagnosis Way of Broken Fault of Memory Address Line
存储器地址线断路故障的检测方法
12.
" Heather told the operator. Then she confirmed her address.
"希瑟告诉接线员，还确认了自己的地址。
13.
multiplexed address & data bus
多路传送地址与数据总线
14.
The microprocessor uses the address bus to locate data stored in memory.
微处理机使用地址总线设定在存贮器中存贮的数据的地址。
15.
The actual address that is placed on the address bus when accessing a memory location or register.
当访问内存位置或寄存器时，在地址总线上的真实的地址。
16.
A memory address consists of binary data being output on an appropriate bus which we call the address bus.
一个存储器地址是由输出到适宜的总线上的二进制数据所组成。这个总线我们称为地址总线。
17.
&Goto Address...
转到地址(&G)...
18.
Method of Low Power Mixing Address Coding in Wireless Sensor Networks
无线传感器网络低功耗混合地址编码算法