1.
Melt spinning involves melting the nylon in an inert atmosphere, controlling the extrusion and solidification of the melt, and collecting the extruded filaments.
熔纺包括尼龙在惰性气体中的熔化、控制熔融体挤出和固化、卷绕挤出的长丝等几个过程。
2.
Nylon is meltspun. That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.
尼龙是采用熔纺工艺制成的,即将由熔化的尼龙切片构成的尼龙熔融体,强制通过喷头的纺丝孔,
3.
The Research of Self-Assembly of Block Copolymers Melt;
嵌段共聚物高分子熔融体自组装的研究
4.
Development on Methods for Determining Shearing Viscosity of Extruded Food Melt
食品挤压熔融体剪切黏度测定方法研究进展
5.
Experiment on Solid Retrograde Eclogite and Amphibolites from Dabie UHPM Belt;
块状样品的部分熔融过程及熔体成分研究
6.
Study of the Melt-Textured Growth Process in Bi System Superconductors
铋系超导体熔融织构生长工艺的研究
7.
Compatibility of PVC/PS Blends with Melt Spinning
PVC/PS熔融纺丝体系的相容性
8.
Nanometer-sized Y_2O_3 Particles Prepared by a Molten Salt Method and Their Characterization
熔融法氧化钇纳米粉体的制备及表征
9.
Study on MMA/St Bi-monomer Melt Grafting POE
双单体MMA/St熔融接枝POE的研究
10.
capable of being melted and fused.
可以被熔化或熔融的。
11.
Numerical Analysis of Flowing for High Polymer in Spinning Pack and Optimization the Structural of It;
熔融纺丝组件熔体流动数值分析及其结构设计优化研究
12.
hot-metal charge
熔融金属料, 铁水
13.
SURFACE TENSION AND DENSITY OF THE MOLTEN YCl_3-KCl SYSTEM
熔融氯化钇-氯化钾体系的表面张力和密度
14.
Basic Study on a Nonflame Combustion Technique with Thermal Cyclic Carrier of Molten Salt
熔融盐循环热载体无烟燃烧技术的基础研究
15.
Grating of ε-Caprolactone onto Polypropene via Bulk-Melting/Surface Initiated Polymerization;
聚丙烯本体熔融/表面接枝聚已内酯的研究
16.
Numerical Simulation Heat and Mass Transfer in a Molten Carbonate Fuel Cell;
熔融碳酸盐燃料电池单体传热传质数值模拟
17.
Tests of Homogenization Temperature and Volatile Content of Melt Inclusions
熔融包裹体均一温度及挥发组分含量测试
18.
The Measurement of Nitrogen Content in Pig Iron by Pulse Heating Inert Gas Fusion Thermal Conductivity Method
脉冲加热惰性气体熔融热导法测定生铁中的氮