1.
Analysis of the Cylindricity Tolerance and Press Mounting Curves of Axle Wheel Seat and Wheel Hub Bore
关于车轴轮座、车轮轮毂孔的圆柱度公差和压装曲线分析
2.
Wheel Hub Installing Holes Parameter Test Based on CCD;
基于CCD的轮毂安装孔形位参数测量
3.
The hub of a wheel.
（轮）毂轮子的中心
4.
hob for cycle wheels (incl. coaster-braking hubs)
脚踏车车轮轮毂（包括倒轮刹车轮毂）
5.
Manual molding had been used for the nodular iron front wheel boss and differential mechanism case, and chills were used to prevent shrinkage defects.
球铁前轮毂和差速器原采用手工造型,用外冷铁解决缩孔缺陷。
6.
Moment Rigidity Analysis on Flange of Automotive Hub Bearings
轿车轮毂轴承轮毂凸缘力矩刚性分析
7.
The spokes of the wheel diverge from the nub.
轮辐从轮毂向四周分出。
8.
"That could be done with the spokes, not with the hub;
“绑轮辐，可以，绑轮毂，不行。
9.
A round covering over the hub of the wheel of a motor vehicle.
毂盖机动车轮毂上的圆盖
10.
SMALLER DIAMETER OF PIVOT BEARING
轮毂轴承的较小直径端
11.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
12.
Install rotor on axle hub.
在车轴轮毂上安装转子。
13.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
14.
Two new spokes and a hub must be made.
我必须重新做两根轮辐和一个轮毂。
15.
a radial member of a wheel joining the hub to the rim.
车轮上连接轮缘和毂的放射状的东西。
16.
"The wheels were made like carriage-wheels, the rods on which they were fixed, the parts forming their edges, their rods and the middle points of them, were all formed out of liquid metal."
轮的样式如同车轮。轴，辋，辐，毂都是铸的。
17.
Deformation Analysis on Precision Forging Straight Spur Gear With a Boss
带轮毂直齿圆柱齿轮精锻的变形分析
18.
Application of a Front Wheel Nave of Forklift in Flatbed Trucks
一种叉车前轮轮毂在平板车上的应用