说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 大面积接触
1.
The contact between drillstring and bore hole wall in the process of horizontal drilling is of large area and geometrically nonlinear.
长中半径水平井钻柱与井壁的接触问题是大面积接触的几何非线性问题。
2.
"Friction is a result of attractive forces Between the contact regions of two Bodies, and the amount of friction is almost independent of the area of contact. "
金属间之摩擦力主要来自接触面间之附着力,亦即所谓之黏合力。摩擦力与接触面积大小无关。
3.
Sliding friction is independent of the area of surface in contact.
滑动摩擦力于表面接触的面积无关。
4.
To increase the contact area and permit larger loads to be carried, the balls run in curvilinear grooves in the rings.
为了增加接触面积并承受较大载荷,滚珠在内外环的曲线槽内滚动。
5.
This increase in friction is attributed again to an increase in area of contact at the F/M interface by the swollen rayon yarn.
这种摩擦力的增加也是由于F/M相交界面粘胶长丝吸湿膨胀引起接触面积扩大的缘故。
6.
A Method of the Printing Press & Contact Area Rate in Half-Toning Dot Printing on Fabrics
织物网点印花压力与接触面积比的关系研究
7.
This results in a fourfold increase of heat (Correspondingly,heat drops by 75% if current density is reduced by half, e.g. by doubling the effective electrode contact area.
相应地,如果将有效的电极接触面积加大一倍,电流密度将减少一半,热量则减少75%。
8.
Access [Hong Kong Arts Development Council]
扩大艺术接触面〔香港艺术发展局〕
9.
2. EX PARTE CONTACTS
(二)单方面接触。
10.
joint contact surface
连接接触面总压紧载荷
11.
The new concepts of flatness, contact area rate, dot distribution and so on are defined.
本文中对适印织物定义了平滑度、接触面积比、网点分配数等新概念 ;
12.
The Correlation between 7-year-old to 9-year-old Children s Masticatory Efficiency, Occlusal Contact Area and Primary Molars Defect or Loss;
7~9岁儿童咀嚼效能与(牙合)接触面积及乳磨牙缺损、缺失的关系
13.
Effects of Pre-and Post-surface Treatment on Ni-based p-GaN Ohmic Contact
Ni基电极淀积前后表面处理对p-GaN欧姆接触的影响
14.
"Contact:a coming together or touching, as of objects or surfaces."
接触:对(物体或表面的)一次靠近或接触.
15.
A coming together or touching, as of objects or surfaces.
接触对(物体或表面的)一次靠近或接触
16.
"To help with the organization, follow up and scope expansion of executive's tasks, and to improve the rate of accomplishment."
协助组织及跟踪工作,扩大接触面,提高成功率
17.
Study on the Bending Strength and Contact Stress of Large Module Involute Cylindrical Spur Gear;
大模数直齿轮轮齿弯曲强度与齿面接触研究
18.
Application of Non-contact Measurement in Big cross-section Loessial Tunnel Construction
非接触量测在大断面黄土隧道施工中的应用