1.
Extra fine machining circuit provides 20％ faster cycletime than that on a conventional EDM.
超细加工电路比传统放电加工机之细加工约快20%。
2.
EDM machines tracer controlled wire
仿形控制的放电加工机床
3.
Non-traditional machine tools--Terminology--Electro-discharge machine tools
GB/T14896.2-1994特种加工机床术语放电加工机床
4.
Keywords: path compensation, wire-EDM, corner accuracy.
关键词：线切割放电加工、迹补偿、角加工精度。
5.
A small current output and intermittent middle current pulse were demanded in the battery for BP.
寻呼机用电池要求小电流连续放电加上间歇中电流脉冲。
6.
A premium quality, high viscosity universal spark erosion fluid,?specially developed for use in Electrical Discharge Machine.
优质、高粘度通用火花电蚀加工油，特别适用于放电加工。
7.
A premium quality, medium viscosity universal spark erosion fluid, specially developed for use in electrical Discharge Machine.
优质、中等粘度通用火花电蚀加工油，特别适用于放电加工。
8.
The Investigation on the Negative Corona Discharge Characteristic in Case of Corona Discharge Wire Heating
电晕线加热情况负电晕放电特性研究
9.
Study on the Discharge Mechanism and Technology in Powder-mixed EDM;
混粉电火花加工放电机理及工艺研究
10.
The released electron is accelerated by the applied field and gains kinetic energy.
被释放的电子在施加的电场的加速下获得动能。
11.
The Study on ESD Damage and Hardening of an Electronic Time Fuze
电子时间引信的静电放电损伤及加固研究
12.
Simulation of Discharge Channel for Non-conductive Ceramics During Electrical Discharge Machining
非导电工程陶瓷电火花加工放电通道模拟
13.
metalworking machine tool operated by electrodischarge processes
金属加工机床,放电程序操作
14.
Adding Control Functions of Playing Cinema in Authorware;
增加Authorware电影播放的控制功能
15.
Cognition on Strengthening Quality Education of Distance Education;
电大开放教育中加强素质教育的思考
16.
Study on volt-ampere properties in WEDM
电火花线切割加工中放电间隙伏安特性的研究
17.
Thick wall model simulation of EDM spark locations detection
电火花加工放电位置检测厚壁模型的仿真
18.
Study on Removing NO_x from Flue Gas by Adding Ammonia and Propylene in Pulsed Discharge;
脉冲电晕放电烟气脱硝中NH_3、C_3H_6添加作用研究