1.
Improvement of Notching Position for Side Notching in Pickling-Tandem Cold Mill Line
酸洗-冷轧机组中侧冲剪冲切位置的改进
2.
Research and Development of the QA35Y-30 Hydraulic Combined Punching & Shearing Machine
QA35Y-30液压联合冲剪机的研究与开发
3.
The times of feed mechanism punching shear is started from0 it can shear in free scope.
送料机构冲剪次数从0开始，任意范围内皆能剪断。
4.
"Hydraulic shear-dual, dia set, resquaring shear set-down out type. "
液压剪,双刃剪,冲模,正方切剪设定
5.
die-cutting machine, for paper or paperboard
纸张或纸板冲压裁剪机
6.
Nanosecond pulse trains obtained with the method of“pruning”the intracavity pulse
用腔内剪切脉冲的方法获得毫微秒脉冲系列
7.
testing methods for impact shear strength of adhesive bonds
胶粘剂剪切冲击强度试验方法
8.
Cut current line or selected block to buffer.
剪切当前行或者所选代码块到缓冲器。
9.
DUCTILE SHEARING WITHIN SUBDUCTION COM-PLEX BELT IN NORTH QILIAN MOUNTAINS CHINA
北祁连山俯冲杂岩带的韧性剪切作用
10.
A Cutting and Punching Algorithm of Circles Based on Three Blocks Pattern
基于三块结构的圆形片剪冲排样算法
11.
The prediction of the punch wear based on the analysis of the shearing surface
基于剪切面分析的冲裁模具磨损预测
12.
Cutting and Punching Layout Algorithm for Circular Blanks Based on Three Blocks Pattern
基于3块方式的圆形片剪冲排样算法
13.
Transverse shear is due it that impact loading is not instantaneous.
由于冲击加载并不是瞬时的,这导致了横向剪切.
14.
Caching and Query Pruning Strategy for Efficient Search Engine Query Execution;
支持查询剪裁的搜索引擎数据缓冲策略
15.
Coupled Thermal-mechanical Analysis of Plastic Shear Zone and Die Damage in Thick Plate Fine Blanking Process
厚板精冲塑性剪切带热力耦合分析与模具失效
16.
The Experiment on the Performance of the Shear Connector in Embedded Composite Beams to Resist Punching
腹板嵌入式组合梁中抗剪连接件抗冲切试验
17.
The understanding and Analysis of punching and shearing in Concrete structure
混凝土结构冲切破坏和剪切破坏的理解与辨析
18.
"In power presses the actual punching, shearing, and forming are done in only a fraction of the operating cycle."
在冲床上,实际的冲压、剪切和成形加工只是工作循环的一部分。