1.
insufficient or excess reinforcement of weld
加强焊缝不足或过量
2.
Study of Drawing Formability and Weld Line Movement of Stiffening Plate of a Front-carling Made of Tailor-Welded Blank;
拼焊板制前纵梁加强板拉深成形及焊缝移动研究
3.
Regression and Analysis on Metal Strength of Welding Seam of Welding Core Wine
药芯焊丝焊缝金属强度的回归与分析
4.
Residual Stress Field Analysis for Aluminum Alloy Cylinder Structure Reinforced by Rib with Discontinuous Fillet;
铝合金筒形筋板加强结构间断角焊缝残余应力场分析
5.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
6.
"Where thickness characteristics at the joint are more important than strength, a thinner welder is possible at reduced joint strength. "
如果焊缝的厚度比强度更重要,则在降低强度条件下可使焊缝更
7.
Study on Weld Shape in Electron Beam Welding of High Strength Aluminum Alloy;
高强铝合金电子束焊接焊缝成形质量研究
8.
The Influence of Intricate Edge of Welded Seams in Thin-walled Pressure Vessels on Strength
薄壁压力容器焊缝错边对强度的影响
9.
Weld X-ray Image Enhancement Based on Contourlet Transform
基于Contourlet变换的焊缝X射线图像增强
10.
High Strength Matching Study on Circumferential Weld of High Grade Line Pipe
高钢级管线钢管环焊缝高强匹配研究
11.
The Repair in Welding Cracks on 20MnMoNi55 Low-alloy High-strength Steel
20MnMoNi55低合金高强钢焊缝裂纹的返修
12.
Drag onto the page to add concave, convex, or flush welds. Increase height to fit above other weld shapes.
拖到绘图页后，可以添加凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接形状。
13.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
14.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
15.
This paper analyses the cause of strength descent of brazing weld, and proposes improving measures.
本文分析了钎焊焊缝强度下降的原因,并提出改进措施。
16.
Removal of strong arc interference in detection of V-shape weld based on path tracking under water
基于路径跟踪的水下焊接V形焊缝识别中强干扰的去除
17.
J-Integral Test and Residual Strength Analysis for Steel 907A and Its Weld;
907A钢及焊缝金属的J积分测试与剩余强度分析
18.
A Research into the Basic Formulation of the Calculation of the Welded Seam Strength of Right-Angle Welded Seam;
关于直角角焊缝强度计算基本公式的探讨