1.
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
2.
End Connections– choice of flanged, threaded or socket weld ends.
(13) 连接端口-可提供法兰、纹或焊接连接端口供用户选择。
3.
End Connections ? choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
4.
When installing solder end valves, conventional soldering techniques should be used.
安装焊接连接端口的阀门时，应该采用普通焊接技术。
5.
End Connections– choice of flanged or socket ends for piping flexibility.
(3) 连接端口-根据连接管道的情况，可选择法兰或承插焊连接端口。
6.
openings through welded joints
通过焊接连接处的开孔
7.
ADJUSTED PRESSURE/ TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/度额定值?
8.
ADJUSTED PRESSURE/TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/温度额定值?
9.
Constant Amplitude Fatigue Test Research of Endplate-Steel Tube of Welded Hollow Spherical Joints of Flatbed Grid Structure
平板网架结构焊接空心球节点端板—钢管连接常幅疲劳试验研究
10.
Remove excess solder with small brush while plastic( soft), leaving a fillet around end of valve as it cools.
在焊接部分成型后，用小刷子清除多余的焊料，使其在焊料冷却后形成一个环绕连接端口的圆角。
11.
Solder paste is applying for the connection between the mount components foot and PCB pads in the SMT assembly.
在表面贴装装配的回流焊接中，锡膏用于表面贴装元件的引脚或端子与焊盘之间的连接。
12.
solder together by using hard solder with a high melting point.
用高熔点的焊料来连接。
13.
Mechanical Behavior of Bolt-weld Joints between Square Concrete-filled Tubular Column and Reduced Beam Section
方钢管混凝土柱—削弱钢梁端栓焊连接节点受力性能
14.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
15.
All gas line joints shall be orbital welded except those connecting to valves.
所有气体管路的连接采用无缝焊接。
16.
LAP ARGON ARC WELDING TECHNOLOGY OF THE TITANIUM - ALLOY TUBE
钛合金管路连接件的搭接氩弧焊工艺
17.
Preparation L401 Rod by OCC Process and Charactering Its Microstructures and Properties;
连铸L401线材及其焊接接头组织和性能
18.
The Bonding Technique of CVD Diamond Thick Film and Welding Tool;
CVD金刚石厚膜及焊接刀具的连接技术