1.
A castability study of a new investment material for titanium casting in different mold temperature
新型铸钛包埋材料不同铸模温度对纯钛铸流率影响的研究
2.
The Effect of Mold Temperature on the Accuracy and Surface Layer Structure of Ti Castings;
铸模温度对钛铸造精度及表面性能影响的实验研究
3.
There can be some trade off between die temperature, cavity filling time and the temperature of the molten metal.
在压铸模温度、腔充填时间和金属熔化温度之间可能要做某些权衡。
4.
Numerical Simulation of Mould/billet Temperature and Concentration Field in the Continuous Casting of Round Billet;
圆坯连铸结晶器/铸坯温度场与浓度场数值模拟
5.
How much pouring temperature of EPC should be improved than that of sand mould casting
消失模铸造的浇注温度应比砂型铸造提高多少
6.
Development of the Temperature Field Model and the Temperature Analysis of Twin-roll Thin Strip Continuous Casting
双辊连铸薄带温度场模型及其温度分布特性
7.
Numerical Simulation of Temperature Field of the Die for Producing Wheel Hub in Die Casting Process;
汽车轮毂压铸模具温度场的数值模拟分析
8.
Temperature Field Simulation and Thermal-Stress Analysis of Al Alloy Pressure diecasting Die
铝合金压铸模具温度场模拟与节点热应力分析
9.
The temperature of the lead should be such that it is just enough to produce satisfactory castings in a heat-stabilized mold.
铅液的温度要正好适宜于在热稳定的模具中铸出合格铸件。
10.
The mixture is poured into the mould preheated to the same temperature.
将混合物注入已预热到同样温度的铸模内。
11.
A Study on EPC Temperature Field and Filling Property of Automobile Al Ingate
进气歧管消失模铸造温度场及充型特性的研究
12.
Optimization of the Foundry Technology for Wear-resisting Cast Ball by Using Numerical Simulation Technique of Temperature Field
利用温度场数值模拟技术优化磨球铸造工艺
13.
Determination of the Temperature Field in Centrifugal Cast Pipe Mould of Hot-mould Process
热模法离心铸管管型温度场的测试研究
14.
Numerical Simulation Software Development on Three-Dimensional Temperature Field of Casting Solidification Process;
铸件凝固过程温度场三维数值模拟软件开发
15.
Study on Numerical Simulation of Coupling Heat Transfer to Fluid Flow During Mold Filling;
铸件流场与温度场耦合计算的数值模拟研究
16.
Study on the Stress and Contingency Field in Continuous Casting of 0Cr13 Stainless Steel Slab;
0Cr13不锈钢板坯连铸温度场及应力场的数值模拟
17.
Study on Numerical Simulation of Coupling Heat Transfer to Fluid Flow during Mold Filling and Solidification;
铸件流场与温度场耦合计算下的数值模拟研究
18.
FEM Simulation of Temperature Field in CPC High-speed Steel Roller in Continuous Casting
CPC高速钢轧辊连续铸造温度场有限元模拟