1.
Calculation of Inlet Absolute Pressure of Water-circle Vaccum Pump
水环真空泵选型设计中泵入口绝对压力的计算
2.
The Experiment Research and Numerical Calculation of Vortek Field of Pump Inlet;
泵入口侧涡量场的实验研究与数值计算
3.
The result certifies that the suction system design is reasonable.
结果表明：给水泵吸入口系统设计是合理的。
4.
The waste acid of 40~55% concentration is pumped into a boiling-bed roaster and roasted in the boiling bed.
将浓度为40～55%的废酸用泵打入焙烧入口,进入沸腾炉的沸腾层焙烧。
5.
Equally effective in checking back flows from head pressure on the discharge or suction sides of pump.
无论是泵的排泄口的排出压力，还是泵的吸入口，其流体止回的效果都是相同的。
6.
Prediction of System Performance of Fankou Pump Unit Based on CFD Simulation
基于CFD的樊口泵站泵装置性能预测
7.
water pump outlet valve flange gasket
水泵出口阀法兰垫片
8.
double entry split casing centrifugal pump
揭壳式双进水口离心泵
9.
My anchor is now lying above the suction, in the open lake.
锚就放在河口的水泵上。
10.
Suction piping for all pumps shall have at least five(5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle.
所有水泵的吸水管道直径至少应有5倍于吸入口的上升直水管段的额定边缘直径。
11.
8.2 Pump the 1.5 S.G. mud to kill the well.
泵入密度1.5的泥浆压井。
12.
slug the hole with viscous mud
往井中泵入一段稠泥浆
13.
fixed insert pump
插入型固定式井下泵
14.
This water is forced into the boiler by the feed pump.
给水泵将水压入锅炉。
15.
While nimodipine was pumped into vein directitly in the control group.
对照组直接用微量泵泵入尼莫地平注射液。
16.
Is Pump Seated on Discharge Properly?
排泄口上的泵设备是否正确固定?
17.
We are now sourcing all our pumps from our European supplier.
我们所有的水泵都是从欧洲进口的。
18.
Research on Wear-rings of Centrifugal Pump Based on CFD Code;
基于CFD的离心泵口环间隙流动研究