1.
Multi Cycle Spinning Thickness Reductior Rate Study and Optimization of Processing Parameter
多道次拉旋减薄率研究及工艺参数优化
2.
Results indicate that the optical band gap of the CN x films is decreased with the increasing nitrogen concentration, accompanied with the reflectance increase of the films.
结果表明：随着薄膜中氮含量的增加，碳氮薄膜的光学禁带宽度减小，红外反射率增加。
3.
attenuating zone
(玻璃纤维)拉细区，拉丝区; 衰减带，减薄层
4.
dry adiabatic lapse rate
干绝热〔温度〕递减率；干绝热〔温度〕直减率
5.
To reduce the risk of damage a light mulch only should be used.
为了减少受害的危险，只应进行薄薄的覆盖。
6.
The Effect of Crystallization Ratio on Dark Conductivity of Poly-Silicon Thin Films;
多晶硅薄膜晶化率对暗电导率的影响
7.
Zone of stretched and thinned continental crystalline basement
拉张减薄的大陆结晶基底区
8.
The distance between peaks increases as the thickness is reduced.
峰值间的距离随厚度的减薄而增大。
9.
Optimization Design & Technical Study on Antireflection Coating System;
减反射薄膜膜系优化设计及工艺研究
10.
Stress Characteristic Study on Local Thinning Area in the Boundary Stress Region;
边缘应力区局部减薄强度特征的研究
11.
Domestic Development of Diaphragm Water-reducing Valve;
Y1A6R型薄膜式水减压阀的国产化
12.
Study on Double Layer Anti-Reflection Coating of TiO_2/TiO_2
单质TiO_2双层减反射薄膜的实验研究
13.
Analysis on edge-drop and its influencing factors in cold rolling
冷轧带钢边部减薄及其影响因素分析
14.
Nonlinear finite element analysis on the local thinned elbow
含局部减薄弯头的非线性有限元分析
15.
STABILITY ANALYSIS OF LOCAL THINNED SHALLOW SPHERICAL ROOF OF STORAGE TANK
局部减薄储罐拱顶非线性稳定性分析
16.
falling rate period of drying
干燥速率渐减[阶段]
17.
average logarithmic energy decrement
平均对数能量衰减率
18.
under frequency load shedding
低频率自动负载减少