1.
In-site masonry mortar cylinder strength test method
现场砌筑砂浆筒强度试验方法
2.
The Theoretical Analysis and Experimental Study on the Strength and Stability of Crane' Drums;
起重机卷筒强度和稳定性理论分析与试验研究
3.
The Finite Element Optimal Design of the Intension of Winding Hoist Machine Roller;
缠绕式提升机卷筒强度的有限元优化设计
4.
Influence of Reinforced Fibers on the Properties of CCC
纤维增强组份对可燃药筒性能的影响
5.
Explanation of the standard test method for climbing drum peel for aluminium-plastic composite panel for curtain wall
关于铝塑复合板滚筒剥离强度的解读
6.
Introduction of Single Openings Compensation for Shell Header and Formed Head
筒体、集箱和成型封头单孔补强介绍
7.
Optimal Design of Multilayer Autofretted High Pressure Chamber of Water Cannon
水炮的多层自增强高压腔筒的优化设计方法
8.
Load Analysis and Determination of Strength Condition for Fit Sleeve
配合套筒的受力分析及其强度条件的确定
9.
Study on Strength of Large-Scale Flat Receptacle Based on ANSYS;
基于ANSYS的大型铝挤压机挤压筒的强度研究
10.
Kinematics Analysis and Strength Study for Haulage Mechanism of Drum Shearer;
滚筒式采煤机行走机构运动学分析及强度研究
11.
Structural Properties of Glass Fibre Reinforced Cylindrical Laminated Veneer Lumber;
玻璃纤维增强圆筒形单板层积材的性能研究
12.
FEM Numerical Simulation on Power Spinning of Cylindrical Workpiece;
筒形件强力旋压过程的有限元数值模拟
13.
The Whole Stability Research of the Mid-hollow Steel-Tube Structure with Stiffening Ring;
带加强环的中空筒体钢结构的整体性能分析
14.
Research on Seismic Performance of Frame-Tube Structure with Strengthened Story;
带加强层的框架—核心筒结构抗震性能研究
15.
The Seismic Analysis in the Frame-Core Tube Structure with the Stiffness-Strengthened Storey;
带加强层的框架—核心筒结构抗震性能分析
16.
Swing Analysis of Frame-tube Structure with Strengthened Stories Subjected to Lateral Load;
设置多道加强层的高层框—筒结构侧移分析方法
17.
Elastic-Plastic Buckling of Ring-Stiffened Cone-Cylinder Intersections under Internal Pressure;
内压作用下环梁加强锥筒连接的弹塑性屈曲
18.
Strength Analysis and Formular Fitting of a Pressurized Cylinder with a Long Rectangular Tube;
带长矩形接管受压圆筒体强度分析及公式拟合