1.
Constructions of Grooves on the Roll-surface of CMS
连续混炼双辊机辊筒表面凹槽的结构形式
2.
abrasive roller
磨毛辊（磨毛机的主要部件,辊筒表面包绕砂布带）
3.
having long narrow shallow depressions (as grooves or wrinkles) in the surface.
在表面有长而狭窄且浅的凹陷的（像凹槽或皱纹）。
4.
) The inside surface of the ring fits in the groove on the piston.
)些环的内表面和活塞上的凹槽相配合。
5.
The side of the bridge or division between cells on a gravure cylinder or the thickness of material on a base cylinder shell.
中义凹版辊筒墨坑间的间隔的侧壁或在辊筒上物体的厚度。
6.
The surfaces of the lead plates were not hollowed out to cup toothless gums; they were flat.
铅制牙托的表面平坦，缺乏凹槽，无法覆盖牙床。
7.
The Development of Image Acquisition System of Inner Groovy of Brake Shaft;
汽车制动钳内凹槽表面粘贴异物的检测
8.
Effects of the surface brightness of grooved drum to operators′ visual fatigue
槽筒表面光泽对操作工人视觉疲劳的影响
9.
a surface with many parallel grooves in it; disperses a beam of light (or other electromagnetic radiation) into its wavelengths to produce its spectrum.
表面上带有许多平行的凹槽；把光线疏散到波长里以产生光谱。
10.
Experimental study on shear property of autoclaved fly ash brick masonry with protruding and concave surface
表面带凸凹槽的蒸压粉煤灰砖砌体抗剪性能的试验研究
11.
The counter of the sink has many grooves along which the water will run off.
水槽的台面上有许多凹槽，水可以沿着这些凹槽流走。
12.
Cylinder gap: The non-printing portion of the peripheral surface of a printing cylinder where lock-up device is installed.
圆筒凹槽:印刷机圆筒上的空档部份。它设有各种锁紧装置。
13.
"Single curved moldings include the cavetto (concave, with a quarter-circle profile), scotia (deep concave), flute (grooved),"
单曲线脚包括凹弧饰(具有四分之一圆的轮廓的凹面)、凹形边饰(深凹面)、凹槽饰(开槽的)
14.
Back up roller: Roller which backs up the impression roller for additional pressure in gravure printing.
加压辘: 在照相凹版印刷机上，给予压力圆筒额外压力的辊辘。
15.
These modifications are usually in the form of surface deformations from embossing by rolls, fluted surfaces, and other fibers.
这些变化通常是受滚筒沟槽表面以及受其他纤维的挤压形成表面变形。
16.
cabled flutings
卷绳饰缺口的柱面凹槽饰纹
17.
decorated flutings
用花、叶形状装饰柱面凹槽饰纹
18.
twisted flutings
呈螺旋状环绕柱身的柱面凹槽饰纹