说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 表面裂纹扩展
1.
REGULARITY OF LOW CYCLE FATIGUE SURFACE CRACK GROWTH OF HULL STRUCTURAL STEELS
船体结构钢低周疲劳表面裂纹扩展规律
2.
Carbide Tungsten-cobalt Ceramics Subsurface Crack's Extent Forecast Model's Establish;
碳化钨—钴陶瓷亚表面裂纹扩展预测模型的建立
3.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
4.
Surface Crack Growth Mode Study on Cement Sand-Slurry Brittle Materials
水泥砂浆脆性材料表面裂纹扩展模式研究
5.
Experimental Study of the Surface Crack Propagation Mode in Rock-like Materials
类岩石材料中表面裂纹扩展模式的实验研究
6.
Specimen for surface crack growth by loading at cantilever bend and application
一种悬臂弯曲加载表面裂纹扩展试样及其应用
7.
The crack surfaces in the web and flange were subjected to visual examination in order to evaluate crack growth regions.
为了估计各裂纹扩展区,对翼缘和腹板的裂纹表面进行了宏观检验。
8.
EFFECT OF SURFACE HARDENING ON FATIGUE CRACK INITIATION AND PROPAGATION IN NODULER CAST IRON
表面强化对球铁疲劳裂纹萌生、扩展的影响
9.
Study on Fatigue Crack Propagation and Stress Intensity Factor of Surface Cracks;
表面裂纹疲劳扩展和应力强度因子研究
10.
SIMULATION AND EXPERIMENT RESEARCH ON CONTINUAL EXTENSION RULE OF 3D SURFACE CRACK
表面裂纹连续扩展规律的仿真试验研究
11.
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
12.
The crack tends to propagation when the dip angle α=45°and the specimen with the dip angle α=45° has the smallest peak strength.
倾角α=45°时表面裂纹最容易扩展,并且试样表现出来的强度最低。
13.
Crack propagation from the flameout edge can be modeled by considering an edge crack in the martensite surface from flame cutting.
裂纹从烧割边缘的扩展可模拟为一个从烧割处的马氏体表面起始的边裂纹。
14.
Thin, long wear sheets are formed and removed when cracks extend to the surface.
当裂纹扩展到表面时,形成并分离出薄而长的磨损碎片。
15.
N. Shlyannikov, Z.B. Kuang, F.P. Yang (2004), Surface fatigue crack growth behavior, Russian journal Power Engineering Problems.
杨凤鹏,林卓英(2004),表面裂纹疲劳扩展的试验,北京科技大学学报.
16.
Effects of Coefficient of Corrosion on Long Crack Expansion after Chemical Milling
腐蚀系数对化铣表面长裂纹扩展影响的定量分析
17.
Influence of Strengthening Shot Peening on Formation and Extension of Fatigue Crack in Carburized Gear Surface
强化喷丸对渗碳齿轮表面接触疲劳裂纹形成与扩展的影响
18.
Simulation Study on Growth Behavior of Rail Tread Oblique Crack;
钢轨踏面斜裂纹扩展行为的仿真研究