1.
Plastics--Determination of tensile properties by use of small specimens
GB/T16421-1996塑料拉伸性能小试样试验方法
2.
Plastics--Determination of impact properties by use of small specimens
GB/T16420-1996塑料冲击性能小试样试验方法
3.
measuring method for weight of cloth; small specimen method
布料重量测定法：小试样试验方法
4.
Plastics--Determination of flexural properties by use of small specimens
GB/T16419-1996塑料弯曲性能小试样试验方法
5.
" Rubber, vulcanized-Determination of tear strength of small test pieces (Delft test pieces)"
GB/T12829-1991硫化橡胶小试样(德尔夫特试样)撕裂强度的测定
6.
cellular plastics-determination of horizontal burning characteristics of small specimens subjected to a small flame
泡沫塑料-小型火焰引发的水平燃烧性测定-小试样试验方法
7.
Sampling Inspection Method Based on Small Sample Size from Complex Population;
基于小样本复杂总体试验的抽样验收方法
8.
The Research on the Test of Structural Concrete Using Small Core;
小芯样试件推定结构混凝土强度试验研究
9.
Experimental Study of LY12 Al Small Dimension Specimen Based on SHPB Test
LY12铝小尺寸试样的SHPB实验探讨
10.
Table 4. 1 for three-point bend specimens shows that the ratio of support span to specimen depth has a small but definite effect on the results.
表4．1的三点弯曲试样表明，支撑跨距对试样高度的比值对试验结果有微小而又确定的影响。
11.
advanced development
试制 -样机或样品
12.
The test program will execute the same mini-scripts for each row.
测试程序将为每一行执行同样的小脚本。
13.
FINITE ELEMENT ANALYSIS OF CREEP DAMAGE OF SMALL PUNCH TEST SPECIMEN AT ELEVATED TEMPERATURE
小冲孔试样高温蠕变损伤的有限元分析
14.
Ignition loss:Burn the test sample at 1000°C to sapecified quantity and measure the reduction.
烧失量：将试样于1000度温度灼烧1小时之减量。
15.
Microstructure analyses of tensile samples by SEM show that crystalline grains are very fine and have the orientated solidification structures.
拉伸试样显微组织晶粒细小，具有定向凝固特征。
16.
The Pharmacodynamic Test of Arotinoid Ethylester on Psoriasiform Mice Model;
芳维A酸乙酯对银屑病样小鼠模型的药效学试验
17.
Random Vibration Accelerated Test and Reliability Evaluation of Small Samples Components;
小子样产品的随机振动加速试验及可靠性评估
18.
Finite Element Analysis of Creep Damage in Small Punch Test Specimen at Elevated Temperature;
小冲孔试样高温蠕变损伤的有限元模拟