1.
An alternative approach using pendulums and dashpots is often used.
叠代法中往往使用单摆和冲击板。
2.
The Study on Titanium Alloy ZTC4 Impacting Sheet Warm Deformation Technology;
ZTC4钛合金冲击板温成形工艺研究
3.
The stilling basin base plate supports large impact pressure in the impacted area.
消能塘底板在射流冲击下,底板块在冲击区受到较大的冲击压力。
4.
A Study on Erosive Effect of Two Phase Impinging Jets on Vertical Plate
两相冲击射流对垂直挡板冲蚀的研究
5.
The Influence of Impact Energy and Impact Angle on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
冲击功、冲击角对湿磨衬板钢冲击腐蚀磨损机理影响
6.
Test methods of thermal shock for printed boards
GB/T4677.11-1984印制板耐热冲击试验方法
7.
The Research on Control Method during Laser Shock Forming of Metal Sheet;
金属板料激光冲击成形控制方法研究
8.
The Destruct Probability of Complicated Plate-shell Structure under Impulsive Load;
冲击载荷对复杂板壳结构的破坏概率
9.
Stress Analysis of a Plate Subjected to Transient Heat Flux at the Boundary;
平板在瞬态热冲击作用下的应力分析
10.
Research Problem about Impact Contact between Euler Plate and Linear Elastic Rod;
Euler板与线弹性杆冲击接触问题研究
11.
ANALYSIS ON DESIGN SHOCK-RESISTANT SPECTRUM OF EQUIPMENT FIXED ON DECK
水面舰艇甲板设备抗冲击设计谱分析
12.
Simulation of Ballistic Impact on Carbon Fiber Laminate Panels
碳纤维层合板弹体冲击仿真方法研究
13.
Study on Improving the Low-temperature Impact Toughness of 3.5% Nickel Heavy Plate
提高3.5Ni厚钢板低温冲击韧性的研究
14.
Numerical Simulation for Micro Laser Peen Forming of Ultrathin Sheet Metal;
超薄板材脉冲激光微冲击成形过程数值模拟
15.
Experimental Study for Micro Laser Peen Forming of 8011 Aluminum Alloy Foil
8011铝合金板材脉冲激光微冲击成形实验研究
16.
Microscale laser peen forming of sheet metal and its research situation
板材脉冲激光微冲击成形技术及研究现状
17.
Study of the Burst-Energy Principle of Rock Burst Induced by Roof Stratum and Its Application
顶板岩层诱发冲击的冲能原理及其应用研究
18.
Numerical Simulation Method for Plate Blade Impact Composite laminates
平板叶片冲击复合材料层合板的数值模拟方法