1.
Shaped insulating refractory products--Determination of cold crushing strength
GB/T3997.2-1998定形隔热耐火制品常温耐压强度试验方法
2.
" Dense, shaped refractory products--Determination of cold compressive strength--Part 1: Referee test without packing"
GB/T5072.1-1998致密定形耐火制品常温耐压强度试验方法(无衬垫仲裁试验)
3.
fine ceramics(advanced ceramics, advanced technical ceramics)-test method for compressive strength of monolithic ceramics at room temperature
细陶瓷-单块陶瓷常温耐压缩强度试验方法
4.
compressive strength, compression strength
抗压强度,耐压强度
5.
Test method for modulus of rupture of refractory products at room temperatures
GB/T3001-1982耐火制品常温抗折强度试验方法
6.
Stainless steel screen made of high-grade and solid stainless steel wire, has many advantages, such as high intensity, acid and alkali endurable, high temperature endurable, pressing endurable, and so on.
不锈钢筛用优质、坚固的不锈钢丝制成，具有强度高、耐酸碱、耐高温、耐压磨等优点。
7.
normal pressure and temperature
额定压力及温度正常压力和温度
8.
testing method for compressive strength of fire brick
耐火砖耐压缩强度试验方法
9.
testing method for compressive strength of insulating fire bricks
绝热耐火砖耐压缩强度试验方法
10.
Carbon materials--Determination of the compressive strength
GB/T1431-1985炭素材料耐压强度测定方法
11.
method of test for crushing strength and modulus of rupture of castable refractories
可浇灌耐火材料抗压强度测定
12.
Analysis on Structure Strength and Stability of Submersible Pressure Tank
耐压液舱结构强度与稳定性(英文)
13.
Influence of finishing rolling temperature on microstructure and properties of Q450NQR1 high strength weathering steel
终轧温度对高强度耐候钢Q450NQR1组织和性能的影响
14.
Correlation of Density of Monoethylene Glycol with Temperature under Normal Pressure
常压下乙二醇密度—温度相关性的研究
15.
For the design of hydraulic pressure. extreme temperature that may occur in use should be considered as design since the hydraulic preddure have a certain relation with temperature.
由于耐水压与温度有关，所以在设计时应考虑可能达到的最高温度。
16.
Test method for modulus of rupture of refractory products at elevated temperatures
GB/T3002-1982耐火制品高温抗折强度试验方法
17.
Test method for modulus of rupture of refractories containing carbon at elevated temperatures
GB/T13243-1991含碳耐火材料高温抗折强度试验方法
18.
Purpose: The equipment is used for mensurating modulus of rupture of refractory products at high temperatures.
该设备用于耐火材料的高温抗折强度的测量。