1.
spin-forming and flow-forming machines
旋压成形机床和滚压成形机床
2.
Fabricating Cone-shape Shield Plates of Garbage Compactor Drum with Roll-forming Process
采用滚压成形工艺制作垃圾压实机滚轮锥形护板
3.
Research on the formation of dimensional chain when thread hob rolls thread by axial intake on doubleroller machine;
双滚柱机床螺纹滚头轴向进给滚压螺纹时形成尺寸链的分析
4.
Development of the Roller Burnishing Plastic Precision Forming for Planes and Thread Rolling Compound Machine;
平面滚压塑性精成形和搓丝复合机的研制
5.
Cutting and Precision Form of Helical Vane of Shearer Drum
采煤机滚筒螺旋叶片的下料及辗压成形
6.
FE simulation on the ball spinning forming of inner grooved copper pipe
内螺纹铜管滚珠旋压成形有限元模拟
7.
Experimental research on ball spinning of thin-walled stainless steel tube
薄壁不锈钢管滚珠旋压成形工艺研究
8.
STATISTICAL ANALYSIS OF DISC CUTTER PRESSING MARK RESULTS ABOUT FULL FACE ROCK TUNNEL BORING MACHINE
掘进机盘形滚刀压痕试验的统计分析
9.
Research on Board-Fins Rolling Method and Forming Process Simulation;
板式翅片滚压成形方法及成形过程仿真研究
10.
It is not only able to reduce rollers in roll forming but also to lower the requirements for centre distance variation between two rollers of forming machine.
该方法可使滚压成形貌轮的对数减少，而且对成形机两辊轮的中心距离变化量要求也不高。
11.
Forming Process of Integral Serrated Outside Finned Tube by Rolling and Plowing/Extruding
三维整体外翅片管滚压-犁切/挤压成形工艺
12.
Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts
薄壁筒形件滚珠旋压成形工装设计及实验研究
13.
Study on Ball Spinning of Tubular Parts with Longitudinal Inner Rib
纵向内筋筒形件滚珠旋压成形的工艺研究
14.
The design essentialities of roll forming process was discussed in this paper. The design method ofroll forming process was analyzed through a real design instance.
讨论了滚压成形工艺的设计要点。通过一个具体实例，分析了滚压成形工艺的设计方法。
15.
The Study of Forming of Rolling with Tension Based on Finite Element Simulation;
基于有限元数值模拟的冷拉伸滚压成形的研究
16.
The Development of Automatic Modeling and Simulation System on Cold Rolling Process of Spline and Thread
花键、螺纹冷滚压成形自动建模与仿真系统开发
17.
Research of the Cold Rolling Technology for Involute Spline
渐开线花键的冷滚压精密成形工艺研究
18.
A new way for determinating of deformation reference of roller design in roll forming is put forward.
提出了一种滚压成形中辊轮设计变形基准确定的新方法。