1.
To heat too much.
使过热把…加热过度
2.
Steam is superheated by being heated above the temperature of saturated steam.
蒸汽被加热到饱和蒸汽的温度以上使之过热。
3.
The steel is first slowly heated to just above its critical temperature .
首先慢慢把钢加热动略微超过临界温度。
4.
the conversion of metals into their oxides as a result of heating to a high temperature.
金属被加热至一定温度变成氧化物的过程。
5.
Effect of Grain Size and Heating Rate on Nitridation Reaction of Metallic Aluminium
粒径与加热速度对金属Al氮化过程的影响
6.
Simulation Research on Inner Temperature Field of Tunnel Kiln Car
隧道窑窑车加热过程内部温度场的仿真研究
7.
The Simulation Research of the Inner Temperature Field for the Heating Process of the Tunnel Kiln Car
隧道窑窑车加热过程内部温度场仿真研究
8.
Computer simulation on temperature field and phase transformation in low-pressure rotor during heating process
低压转子加热过程温度场与相变的计算机模拟
9.
But we will only know just how far we will go in showing our love for our country when we are put to the test.
新加坡人的爱国热忱热到什么程度，得经过考验才知道。
10.
DANGER: Never heat an aluminum cylinder with electrical resistance elements. Only cylinders made of steel should be electrically heated. Aluminum cylinders can be severely damaged by excessive temperature exposure.
危险：禁止用电阻元件加热铝瓶。只有钢制容器才能用电加热。暴露于过高的温度会严重损坏铝瓶。
11.
It can discharge frozen water which is nearly saturated. The degree of super cooling is small and there is noaccumulation of water in the heating.
☆能排除接近饱满和状态的凝结水，过冷度小，加热设备不会有水积聚，能获得最高的加热效率。
12.
Fast heating, high precision of tempt control and high thermal efficiency.
加热速度快，控温精度高，热效率高。
13.
reduced to liquid form by heating.
通过加热使变成液态。
14.
To melt(a solid)by heating.
熔化通过加热熔化固体
15.
To dry by heating.
烘干通过加热使变干
16.
Water is converted to steam in the boiler, and the steam thus formed is superheated above the boiler temperature .
水在锅炉里变成蒸汽，而这样形成的蒸汽再加热会超过锅炉的温度。
17.
We could instead emulate James Joule and increase the temperature solely by doing work on the water.
我们可模仿焦耳的方法代替加热，只通过对水作功来升高温度。
18.
The Tentative Study on Air-bubble Elimination and Temperature Control Technology in Process of Automatic High Frequency Inductive-heating Melting Sample;
高频感应加热熔样过程的气泡去除与温度控制技术研究