1.
automatic high speed refrigerated centrifuge
自动高速冷却离心机
2.
After cooling, the emulsion flows into a centrifuge.
冷却后，乳状液流入离心分离机。
3.
centrifuge, high-speed, for the chemical industry
化学工业用高速离心机
4.
Analysis of Engine Combustion Chambers for Cooling Performance under the Conditions of High Altitude and Low Velocity
某型发动机高空、低速下燃烧室冷却性能分析
5.
Study on Ti6Al4V High-speed Machining Mechanism under Different Cooling Conditions
不同冷却润滑条件Ti6Al4V高速加工机理研究
6.
Analyses the effects of variable condenser water flow on COP of centrifugal chillers.
分析了冷却水变流量对离心式制冷机性能系数的影响;
7.
A centrifuge is a device for whirling an object with a high velocity.
离心机是使物体作高速旋转的装置。
8.
Application of Morgan cold controlling techique in High Speed Wire Rod Mill of Tiangang
摩根控制冷却技术在天钢高速线材轧机中的应用
9.
Numerical Simulation of Rotating Stall inside High Speed Centrifugal Compressor Using Entire Geometry Mesh
高速离心压缩机旋转失速的全流场数值模拟
10.
"The furnace is equipped with a high efficiency compact spray cooling device with high cooling capacity, high cooling rate and good uniformity, by which the length of the cooling zone is reduced. "
采用高效紧凑式喷射冷却装置,冷却能力大,速度快,冷却均匀,大大缩短了冷却段的长度
11.
The Disrepair Mechanism of Blast Furnace Cooling Stave and Design of Copper Cooling Stave
高炉冷却壁的破损机理及铜制冷却壁的设计
12.
AUXILIARY AUTOMATIC TRANSMISSION OIL COOLER
辅助自动变速箱机油冷却器
13.
The Application of Frequency Converter and PLC in High Building Water Supply;
200MW汽轮机组快速冷却优化研究
14.
Optimization for Control-Cooling Process of High Speed Rolled Wire of Steel 82A
82A钢高速线材控制冷却工艺的优化
15.
coolant mechanism
冷却装置，冷却机理
16.
Heavy Ion Synchrotron and Cooler-Storage-Ring in Lanzhou
千兆电子伏重离子加速器——兰州冷却储存环
17.
The strip is cooled from heat treatment temperature to around 480 c with high efficiency spray cooling device quickly.
利用高效喷射冷却装置快速地将带钢从热处理温度冷却至480℃左右。
18.
Fuzzy reliability design of High-speed Vertical Tumbler Centrifuge Spindle;
高速立式进动离心机主轴模糊可靠性设计