1.
Track, front 1685 mm
前轮距1685 mm
2.
Track, rear 1690 mm
后轮距1690 mm
3.
The distance between two wheels on an axle.
轮距车轴上一对车轮之间的距离
4.
And the wide track, long wheelbase, low centre of gravity and 50:50 weight distribution ensure perfect balance at all times.
宽轮距、长轴距、低重心和前后50:50的重量分配构成了完美平衡。
5.
range hand wheel
距离手轮, 距离盘
6.
fixed-center change gear
固定中心距变速齿轮
7.
fixed-center change gears
固定中心距变速齿轮系
8.
Dual spacing of vehicle wheels
GB/T17351-1998汽车车轮双轮中心距
9.
Excessive distance between pinion gear and flywheel/drive plate gear.
小齿轮和飞轮/驱动板齿轮之间距离过大。
10.
The distance from the center of the front wheel to that of the rear wheel in a motor vehicle, usually expressed in inches.
轴距机动车中从前轮中心到后轮中心间的距离，常用英寸表示
11.
Testing System of Tyre Contour Figure Based on Distance Detect
基于测距原理的轮胎外形轮廓检测系统
12.
Belt drives--Pulleys--Limiting values for adjustment of centres
GB/T15531-1995带传动带轮中心距调整极限值
13.
Distance and speed measurement of intelligent dolly with wheels
轮式智能小车行驶距离和速度的检测
14.
Contour Matching Based on Hausdorff Distance;
基于Hausdorff距离的轮廓线匹配
15.
Numerical simulation of 3D turbulent flow in equality screw-pitch Inducer
等螺距诱导轮的理论分析与数值模拟
16.
It introduces a new kind of generating method of non-equidistant curves.
提出了直纹面叶轮叶片非等距轮廓线的生成方法。
17.
THE CALCULATION OF OPTIMUM OFFSET DISTANCE IN CAM MECHANISM--THE APPLICATION OF MICROCOMPUTER IN THE DESIGN OF CAM
凸轮机构最佳偏距的计算——微机在凸轮机构设计中的应用
18.
The distance between the competitor's body and the inside length of handgun slide or in the case of a revolver the distance between the competitor's body and the cylinder.
选手身体与手枪滑套内面的距离,或是当使用转轮手枪时,则为选手身体与转轮间的距离。