1.
Flat belt drive pulleys diameters
GB/T11358-1989平带传动带轮直径尺寸
2.
The effective diameter of the motor pulley is obtained by subtracting 5 mm from the outer diameter.
马达皮带轮的有效直径为外径减5mm 的数值。
3.
bead diameter at rim seat of cycle tyre
力车轮胎胎圈着合直径
4.
SMALLER DIAMETER OF PIVOT BEARING
轮毂轴承的较小直径端
5.
Deformation Analysis on Precision Forging Straight Spur Gear With a Boss
带轮毂直齿圆柱齿轮精锻的变形分析
6.
The Research of Rolling-wheel-measuring-head Calibration Method for the Measuring System of Large Diameter
大直径滚轮测量系统滚轮测头标定方法研究
7.
three-diameter ells with tangents
带切线直管段的三倍直径弯头
8.
The linear speed of ratio of a pulley is in proportion to its diameter.
滑轮的线速度比率与它的直径成正比。
9.
Method of Calculating Three Cone Bit Diameter by Using Excel
用Excel实现三牙轮钻头直径计算的方法
10.
When using a motor of 2P, use the motor pulley, the outer diameter of which is 50mm or less.
使用2P 马达时，请使用外径50mm 以下的马达皮带轮。
11.
Key Techniques on the Measurement for Large Diameter Using Multi-roller Method;
多滚轮大直径测量中若干关键技术研究
12.
The Development about Framework and Assembling & Adjusting System of the Large Diameter Measurement System with Idler Wheels;
大直径多滚压轮测量仪支架及装调系统研制
13.
Iso-Composition Contour Method for Functionally Graded Material Part Path-Planning;
等成分轮廓线的FGM零件直接成形路径规划方法
14.
Influence of Pump Impeller Diameter on the Hydraulic Characteristics of Low Head Pump System
水泵叶轮直径对低扬程泵装置水力性能的影响
15.
Study on Curve Radius Standard for Linear Metro
直线电机轮轨交通线路最小平曲线半径研究
16.
RESEARCH ON PRODUCTION OF Φ2000 mm SUPER LARGE GAS TURBINE DISK OF SUPERALLOY
直径2000mm超大型高温合金涡轮盘的制造工艺研究
17.
Research on Side Mill Way Planning Algorithm of Centrifugal Impeller Blade Ruled Surface
离心叶轮直纹叶片侧铣路径规划算法研究
18.
A Portable Measuring Device for Circular Profile and Wheel Diameter
便携式轨道车辆车轮不圆度及直径测量装置