1.
Studies on Deformation of Non-Contacting Gas-Lubricated Face Seal;
非接触式气体润滑机械密封变形研究
2.
Numerical Analysis of Face Deformation of a Laser Textured Micro-Pore Face Mechanical Seal;
激光加工多孔端面机械密封变形的数值分析
3.
Simulation of polyurethane pre-compressing seal deformation process in high-pressure tube-testing press with finite element method
高压水压试管机轴向预压紧密封变形过程有限元仿真
4.
Finite Element Analyse of the Distortion of Sealing Ring of Spiral Groove Gas Face Seals;
螺旋槽气体端面密封密封环变形有限元分析
5.
Analysis of Seal Rings Nonlinear Distortion and Seal Capability of Bearing;
密封件非线性变形与轴承密封性能研究
6.
The basic property study of the automobile weather-strip seals compression deformation
轿车密封条压缩变形的基础性能研究
7.
A method to improve seal property by plastic deformation;
一种用塑性变形改善密封性能的方法
8.
Optimization of Rotary and Stationary Rings in the Equipment with Dry Gas Seal Based on Thermal Deformation Compensation
基于热变形补偿的干气密封动静环优化
9.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式：一为填料密封；一为O型密封环密封。
10.
triangular asperities technique
三角形凸点密封技术
11.
BALL JOINT SEAL BOOT
球形接头密封防尘套
12.
Taper type hanger and straight type hanger are available for tubing head.
油管挂的密封形式有非金属密封(图一)金属密封(图二)种形式。
13.
Super low compression set guarantes its good sealed performance.
◆ 超低的压缩永久变形，保证了产品的长期良好密封效果。
14.
Casing damages are classified into deformation, breakage and sealing damages.
套管损坏主要分为套管变形、破损和密封性破坏3类。
15.
Study on the Structure and Properties of the Seal Material with Low Compression Set and High Obstruction;
低压缩永久变形高阻隔密封材料的结构与性能研究
16.
Research on elastic deformation and flexural rigidity of the seal plate in the combination type slurry valve
组合式矿浆阀密封板的弹性变形和弯曲刚度研究
17.
Effects of Dimensional Tolerance on Sealing Characteristic of O-ring;
O形橡胶密封圈尺寸公差对密封性能的影响
18.
Finite Element Analysis on Rubber Sealing Y-ring in the Condition of Static Seal
静密封条件下Y形橡胶密封圈有限元分析