1.
High-Precision Analytical Formulas of Large Deflection Problem for Annular Throttle-Slice in Shock Absorber
减振器环形阀片大挠曲变形的高精度解析式
2.
Analytic Computation of Throttle Slice Deformation on Linear Non-uniform Pressure for Telescopic Shock Absorber
线性非均布压力下减振器环形阀片变形解析计算
3.
Remove the pressed in relief valve seat and seat O-ring.
拆卸压进去的安全阀阀座和阀座O形环。
4.
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
5.
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
6.
Experiment and analysis of large deflection of throttle slice of hydro-pneumatic spring
油气弹簧环形节流阀片大挠曲变形分析与试验
7.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式：一为填料密封；一为O型密封环密封。
8.
The check valves shall be modular and shall seal to the main valve body by the use of an O-ring.
止回阀应该是模块化，并通过一个O形环密封连接到主阀体上。
9.
A too narrow sealing surface of the lamella combined with the improper material quality of the lamella is the main cause affecting the annular scars on the safety value.
阀瓣密封面过窄与阀瓣材质的选择不当，是影响安全阀环形伤痕的主要原因。
10.
The circular ring joint bonnet seal has proven to be the best bolted high pressure bonnet joint available.
这种圆形环状连接阀盖密封经过实践证明是目前最好的螺栓高压阀盖连接。
11.
Reinsert the check modules and O-rings into body in direction of flow.
沿着流向将止回模块和O形环重新插入到阀体内。
12.
Inferential Reasoning on the Mathematical Model of Value Plug of Control Value
调节阀柱塞型阀芯形面数学模型推导
13.
ball check valve
球形止回阀（附有球阀和阀座的阀门,液体只能单方向通过）
14.
exhaust by-pass valve control wire switch
排气旁通阀控制线转环
15.
The sectional drawing illustrates the body cavities surrounding the plug. Circulation is provided from the spaces above and below the plug.
断面图说明环绕阀塞的阀体空穴。从阀塞上方和下方空间提供环流。
16.
In order to gain access to the seat and clapper rubber ring, you must compress the spring (#3) that surrounds the clapper shaft (#1).
为了接近阀座和阀瓣橡胶环，必须压缩环绕阀瓣轴（1号）的弹簧（3号）。
17.
automatically shutting pressure of needle valve
针形阀自动关闭压力
18.
Chepos valve tray
切普斯条形浮阀塔盘