1.
Flash power: Through rotary switch○11 you can readjust the flash light and obtain ideal light source.
闪光功率：通过旋钮开关⑾可使您的闪光灯发出不同光亮，从而便您达到理想光源。
2.
This control is used to turn the unit on and off and adjust the volume
这个旋钮用来开关机器及调整音量。
3.
A rounded control switch or dial.
旋钮圆形的控制开关或圆盘
4.
Mode switch. This control is used to select the desired transmit mode. The modes available are:
模式开关,这个控制旋钮能选择你要求的发射模式,可选模式有:。
5.
the release button, knob, etc
释放按钮、 旋钮等.
6.
Twist that knob to the right and the box will open.
把旋钮向右扭转，盒子就会打开。
7.
Close the regulator. To close the regulator, turn the adjusting knob to the full counter-clockwise position. The regulator must be closed before opening the cylinder valve.
关闭调整器。要关闭调整器，把调整钮逆时针旋死。在开启钢瓶阀门之前，必须关闭调整器。
8.
PUSH AND HOLD THE EBL BUTTON SWITCH.
按下并保持ＥＢＬ按钮开关。
9.
Push-button water temperature control
按钮式水温控制开关
10.
Four modes of operation are possible.
控制开关钮有四档。
11.
While holding the release button depressed, pull the knob and shaft out of the headlamp switch.
保持钮的按住状态，将按钮和轴拉出开关。
12.
Un-clamp the upper gate rail by releasing the2 hand knobs.
旋松闸门近旁的2个手动旋钮而使上闸门门轨松开。
13.
Rotate knob to full-closed and back to full-open to test for free rotation.
将旋钮旋转到全闭的位置，然后旋回到全开的位置，测试是否旋转灵活。
14.
The HOLD switch deactivates the buttons on the cassette holder.
HOLD开关可使卡带架上的钮键失效。
15.
an electrical switch operated by pressing a button.
通过挤压按钮操纵的电开关。
16.
Door mounted pushbutton to simulate float switch operation.
在门上安装按钮,模仿浮动开关操作。
17.
Press down and hold the tuning knob and lamp button while turning on the radio.
同时按下并保持调谐钮和灯开关，打开机器。
18.
You can turn the knob here in any direction you like. If you want to shut it off, you can turn it tightly to the right.
您可以把这个旋钮调整到你需要的地方。如果您想关掉，就向右转紧。