1.
Finite Element Simulation of Internal Pressure of Backward-Extruding Containers and Optimization of Combined-Containers;
反挤压凹模内压力的有限元模拟及组合凹模优化
2.
Study on the Stress Distribution of Cold Extrusion Die under Inner Pressure
冷挤压模受内压作用应力分布规律的研究
3.
A Structure Modeling Study on the Job Intrinsic Stressors and Extrinsic Stressors of the Managers;
管理者工作内源压力与外源压力的结构模型研究
4.
Numerical Simulation about Pressure Loss Coefficient for Inner-cone Flowmeter at Different Pressure
不同压力下内锥流量传感器压力损失系数的数值模拟研究
5.
The Numerical Prediction Method of the High Speed Train Crossing Pressure Waves in a Single Bore Tunnel
隧道内高速列车会车压力波的数值模拟方法
6.
Fea of Stress and Deflection in Dies of Tube Hydroforming;
内高压模具应力和变形规律有限元分析
7.
MODIFICATION OF FIP STRUT-AND-TIE MODEL FOR DESIGN OF INTERIOR ANCHORAGE ZONES OF POST-TENSIONED CONCRETE STRUCTURES
预应力混凝土内部锚固区拉压杆模型的修正
8.
A Nonlinear Model to Calculate Post-Internal Fault Parameters of Power Transformer
电力变压器内部故障的非线性仿真模型
9.
Numerical simulation of characteristic points reflective pressure on the inner surface of the explosion chamber
爆炸塔内壁特征点的反射压力数值模拟
10.
Study on the numerical simulation of pressure distributes in cyclone
旋流器内压力分布特性的数值模拟研究
11.
Calculation model of HV power capacitor internal hottest-spot temperature
高压电力电容器内部最热点温度的计算模型
12.
Numerical Simulation of Convection Heat Transfer for CO_2 at Supercritical Pressure in Vertical Circular Tube
超临界压力CO_2在垂直管内对流换热数值模拟
13.
Numerical simulation of dynamic pore pressure in asphalt pavement
沥青路面内动空隙水压力的数值模拟(英文)
14.
Molding Chamber Distributed Pressure Measuring System Based on FBG Sensing Technology;
基于光纤光栅传感技术模压腔内分布式压力测量系统研究
15.
The extrusion load of ECAP at die angle ψ=0 and inner angle=90° is analyzed by the upper bound solution method.
采用上限法分析模具外角?=0和模具内角?=90°时的挤压力。
16.
Study on Strategies of Restraining Surplus Torque in Electro-Hydraulic Load Simulator Based on Interior Pressure Feedback Principle;
基于内部压力反馈的负载模拟器多余力矩抑制策略研究
17.
If the pressure builds up excessively, the pressure valve opens to relieve the pressure.
如果油箱内压力过高，则压力阀开启，以降低压力。
18.
The pressure inside equals the pressureoutside.
内部的压力与外部的压力相等。