1.
Check drain valve to make sure that it is closed.
把四个前面板螺丝和两个顶部法兰上的螺丝卸下来。
2.
Remove the four front panel screws; two at the top flange. Check drain valve to make sure that it is closed.
把四个前面板螺丝和两个顶部法兰上的螺丝卸下来。检验排水阀,确保排水阀处于关闭状态。
3.
tap and die set
全套螺丝攻和螺丝板牙
4.
pepe stock and dies
管子丝攻和螺丝钢板
5.
Remove the screw attaching the front of the end cap to the underside of the quarter panel.
拆去连接末端端盖前面到部分板下侧的螺丝。
6.
Remove the fender lower screws.
拆下挡泥板下螺丝。
7.
gas stocks and dies
煤气管螺丝板牙和扳手
8.
self opening die head
自动开合螺丝板牙切头
9.
All floor-mounted cabinets are supported on four leveling screws that are adjustable from access in toe base.
所有地面安装式柜体均由4个可调螺丝支撑，由踢脚板开口处调整螺母以调节台面水平。
10.
A surface in the form of a coil or screw.
螺旋面具有线盘或螺丝形状的表面
11.
The enterprise shanghai tongsheng trade co., ltd. offers among other things Wall screws and Chipboard screws.
为您提供关于切削板螺栓或墙螺丝钉的信息。
12.
Remove Forcing Screw 6960-4, Step Plate 8140–2, and Threaded Adapter 8140-
拆下加固螺丝6960-4、踏板8140–2和螺纹接头8140-1。
13.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
14.
Install screws at the front of the quarter trim panel.
安装在三角饰板前部的螺丝。
15.
Remove the fender top, front and the rear screws.
拆下挡泥板顶部、前部和后部螺丝。
16.
Install all fender screws finger-tight.
安装时用手指拧紧所有的挡泥板螺丝。
17.
The blackboard was screwed down to the wall.
黑板是用螺丝拧在墙上的。
18.
Insert and screw the mounting screws through the motherboard screw holes and into the standoffs.
再将螺丝分别锁定在固定主机板用的铜柱螺丝孔位置中。