1.
Research on Technology and Weld Strcture Performance of Dual Laser Beam Multi-Layar Welded Hihg Strengh Steel with Hot Wire
高强钢双光束热丝多层焊工艺及接头组织性能研究
2.
Research on Microstructure and Property of Flux-cored Welding Wire Surfacing
药芯焊丝堆焊热作模具耐磨层组织性能试验研究
3.
Study on the Surface Coating of Welding Wire of CO_2-Gas Shielding Arc-Welding;
CO_2气体保护焊焊丝表面涂层技术探索
4.
Inversing Parameter Values of Double Ellipsoid Source Model during Multiple Wires Submerged Arc Welding by Using Pattern Search Method
模式搜索法反演多丝埋弧焊双椭球热源模型参数
5.
Inversing parameter values of double ellipsoid source model during multiple wires submerged arc welding by using Step Acceleration Method
加速步长法反演多丝埋弧焊双椭球热源模型参数
6.
Influence of Metal Underlayers on Low-temperature Deposition of Poly-silicon Thin Films by Hot-wire CVD;
过渡层对热丝法低温制备多晶硅薄膜的影响
7.
Magnesium Alloy Welding Wires Prepared by Hot-Extruded and Welding Performance;
热挤压法制备镁合金焊丝及其焊接接头分析
8.
Argon Arc Surfacing with Flux-cored Wires for New Type of Casting High Cr Hot-Working Die Steels;
新型铸造高铬热作模具钢药芯焊丝氩弧堆焊
9.
Development of Metal Powder-cored Wire for Submerged Overlaying on Hot Roll;
热轧辊埋弧堆焊用金属粉型药芯焊丝的研制
10.
Research on Microstructure and Property of Flux-cored Welding Wire Wear-resistant Overlay
药芯焊丝堆焊耐磨覆层组织性能试验研究
11.
Hot-Wire TIG Cladding Copper on Steel and the Microstructure Analysis of the Joint
铜/钢热丝TIG堆焊工艺及接头组织分析
12.
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
13.
| wandering block sequence
电弧飘移多层焊次序
14.
The technology requirements and characteristics of overlay of a refractory steel build-up welding wire are introduced.
介绍了一种热强钢堆焊焊条的堆焊工艺要求、焊层特性。
15.
Experimental Study on Multi-scale Coherent Structures in Turbulent Boundary Layer Controlled by a Group of Parallel Heating Wires on the Wall;
壁面平行加热丝控制湍流边界层多尺度相干结构的实验研究
16.
Influence of Cu-induced layer on microstructure of poly-Si films deposited by hot-wire chemical vapor deposition
金属Cu诱导层对热丝法制备多晶硅薄膜微结构的影响
17.
Suitable for large power welding such as single/double wire high speed and high efficient submerged welding, big wire gas shielded welding, large current gas gouging welding etc.
可用于单丝/双丝高速高效埋弧焊，粗丝气保焊，大电流气刨等多种大功率焊接方法.
18.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究